How to Service an ABS Control Module on 2003 Dodge Stratus?

First, unplug the battery's negative cable and raise your vehicle to service the Electronic Brake Control Module. To remove the 24-way and the pump/motor Cab connectors, pull up on the connector lock from within the Cab. Loosen the bolts keeping the integrated control unit bracket secured to the support under the lower radiator and then move the unit carefully to the right, keeping the brake tubes straight. Take off the screws that hold the Cab to the Hcu half of the Icu and pull out the Cab. To assemble, get the Cab in place over the Hcu part of the Icu and fasten it with screws applying a force of 2 Nm (17 In. lbs). Put the Icu mounting bracket back into its spot under the radiator and tighten the bolts to 28 Nm (21 Ft. lbs.) of torque. Connect the 24-way electrical and the pump/motor wire connectors, raise the vehicle and link the negative battery terminal back on. Then, attach a Drbiii to the vehicle and turn on the device.

OEM 2003 Dodge Stratus ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2003 Dodge Stratus Control Module Part Number: 5093774AA
$518.60 MSRP: $744.00
You Save: $225.40 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake
- Replaces: 5080634AA, 5093740AA
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Dodge Stratus Modulator Valve Part Number: MR370625
Product Specifications
- Other Name: Master Cylinder - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR370625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Dodge Stratus Control Module Part Number: MR370624
Product Specifications
- Other Name: Master Cylinder - Anti-Lock Brake System; ABS Hydraulic Assembly; Modulator Valve; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 6.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR370624
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Dodge Stratus Modulator Valve Part Number: 5018254AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018254AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2003 Dodge Stratus ABS Control Module Parts and Q&A

Q: How to Service an ABS Control Module on 2003 Dodge Stratus?
A: First, unplug the battery's negative cable and raise your vehicle to service the Electronic Brake Control Module. To remove the 24-way and the pump/motor Cab connectors, pull up on the connector lock from within the Cab. Loosen the bolts keeping the integrated control unit bracket secured to the support under the lower radiator and then move the unit carefully to the right, keeping the brake tubes straight. Take off the screws that hold the Cab to the Hcu half of the Icu and pull out the Cab. To assemble, get the Cab in place over the Hcu part of the Icu and fasten it with screws applying a force of 2 Nm (17 In. lbs). Put the Icu mounting bracket back into its spot under the radiator and tighten the bolts to 28 Nm (21 Ft. lbs.) of torque. Connect the 24-way electrical and the pump/motor wire connectors, raise the vehicle and link the negative battery terminal back on. Then, attach a Drbiii to the vehicle and turn on the device.