Other Name: Weather Strip - Rear Door Sill Secondary; Door Seal, Rear Right Inner, Rear Right Lower; Weatherstrip; Weatherstrip Rear Door Sill Secondary; Door Seal
Position: Rear Lower Passenger Side
Item Weight: 0.60 Pounds
Item Dimensions: 30.4 x 5.4 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4878998AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
Other Name: Weather Strip - Rear Door Sill Secondary; Door Seal, Rear Left Inner, Rear Left Lower; Weatherstrip; Weatherstrip Rear Door Sill Secondary; Door Seal
Position: Rear Lower Driver Side
Item Weight: 1.40 Pounds
Item Dimensions: 28.4 x 1.6 x 0.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4878999AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
Other Name: Weather Strip - Rear Door Opening; Door Seal, Rear Left; Weatherstrip; Body Weatherstrip; Weatherstrip Rear Door Opening; Door Seal
Position: Rear Driver Side
Replaces: TC99XT5AE
Item Weight: 1.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: TC99XT5AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
| Page 1 of 3 |Next >
1-20 of 42 Results
2003 Dodge Stratus Weather Strip Parts and Q&A
Q: How to Maintain and Fix a Weather Strip on a Drip Rail on 2003 Dodge Stratus?
A: Start by reaching inside through the front and rear doors to remove the two screws. Pull the drip rail away from the windshield side molding, after setting the splash shield to the side and starting from the bottom of the A-pillar, then eliminate it from the roof rail around the opposite side of the door openings. Following removal of the weather strip, line up the new one, placing it above the door openings on the pinch flange on the roof rail and then work it along the top of the A-pillar down to the windshield side molding. After you secure the splash shield in place, attach its two screws and close up the front and rear doors.