How to Maintain a Power Window Switch on 2003 Jeep Grand Cherokee?

To service the power window switch, remove the negative battery cable, and remove the rear door trim panel. Pry out the switch receptacle so that the switch is released, and remove it. For installation, place the new switch and press until it snaps in. Install the trim panel again and reconnect the battery.

OEM 2003 Jeep Grand Cherokee Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Window Switch found

View related parts
2003 Jeep Grand Cherokee Window Switch, Black Part Number: 5HB57DX9AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HB57DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2003 Jeep Grand Cherokee Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2003 Jeep Grand Cherokee?
A: To service the power window switch, remove the negative battery cable, and remove the rear door trim panel. Pry out the switch receptacle so that the switch is released, and remove it. For installation, place the new switch and press until it snaps in. Install the trim panel again and reconnect the battery.