How to Replace the Seat Heater Switch for the Driver's Seat on 2003 Jeep Grand Cherokee?

To remove the driver heated seat switch, unconnection of battery negative cable. Take the bezel off in the middle of the lowermost area and the four screws that hold the switch. Install the new switch by tightening the screws with 1.5 Nm and rejoin the bezel and the battery cable.

OEM 2003 Jeep Grand Cherokee Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2003 Jeep Grand Cherokee Switch Part Number: 56033017AB
$60.49 MSRP: $76.68
You Save: $16.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033017AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2003 Jeep Grand Cherokee Switch Part Number: 56033019AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.9 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033019AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2003 Jeep Grand Cherokee Seat Heater Switch Parts and Q&A

Q: How to Replace the Seat Heater Switch for the Driver's Seat on 2003 Jeep Grand Cherokee?
A: To remove the driver heated seat switch, unconnection of battery negative cable. Take the bezel off in the middle of the lowermost area and the four screws that hold the switch. Install the new switch by tightening the screws with 1.5 Nm and rejoin the bezel and the battery cable.