How to Remove and Install a Steering Knuckle on 2004 Chrysler 300M?

To remove the steering knuckle, raise a vehicle, remove the front wheel, remove the caliper, unscrew the speed sensor. Remove hub and bearing then ball joint stud. Install the new knuckle, tighten bolts and reassemble hub, rotor and caliper, making sure torque specifications are correct.

OEM 2004 Chrysler 300M Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2004 Chrysler 300M Knuckle, Front Driver Side Part Number: 4782125AC
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 4782125, 4782125AB
- Item Weight: 10.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782125AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
2004 Chrysler 300M Knuckle, Front Passenger Side Part Number: 4782124AC
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 4782124, 4782124AB
- Item Weight: 10.20 Pounds
- Item Dimensions: 13.8 x 11.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782124AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 6 Cyl 3.5 L GAS

2004 Chrysler 300M Steering Knuckle Parts and Q&A

Q: How to Remove and Install a Steering Knuckle on 2004 Chrysler 300M?
A: To remove the steering knuckle, raise a vehicle, remove the front wheel, remove the caliper, unscrew the speed sensor. Remove hub and bearing then ball joint stud. Install the new knuckle, tighten bolts and reassemble hub, rotor and caliper, making sure torque specifications are correct.