How to Service a Door Lock Actuator on 2004 Chrysler Crossfire?

Open the access panel in the right rear trim in order to service the power door lock actuator. Unscrew the lock pin and take out the pneumatic supply line. Rotate the actuator to take off the actuator. To install, align and fit in the actuator, after which the supply line should be reconnected and the panel closed.

OEM 2004 Chrysler Crossfire Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Actuators found

View related parts
2004 Chrysler Crossfire Lock, Front Passenger Side Part Number: 5099148AA
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
- Position: Front Passenger Side
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099148AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire Lock, Front Driver Side Part Number: 5099149AA
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
- Position: Front Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099149AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Door Lock Actuator Parts and Q&A

Q: How to Service a Door Lock Actuator on 2004 Chrysler Crossfire?
A: Open the access panel in the right rear trim in order to service the power door lock actuator. Unscrew the lock pin and take out the pneumatic supply line. Rotate the actuator to take off the actuator. To install, align and fit in the actuator, after which the supply line should be reconnected and the panel closed.