How to Replace a Tail Light Unit on 2004 Chrysler Crossfire?

Before changing the tail lamp unit, remove the negative battery cable first. Following this, take out the access panel from the inside trim panel, cut the connector for the tail lamp unit and remove the nuts holding it in place. For installation, put the tail lamp into the rear body panel and tighten the retaining nuts to keep it fixed. Afterward, join the harness connector, replace the rear access panel inside the vehicle's interior panel and attach the negative battery cable.

OEM 2004 Chrysler Crossfire Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2004 Chrysler Crossfire Tail Lamp Assembly, Rear Passenger Side Part Number: 5098677AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 15.7 x 12.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098677AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire Tail Lamp Assembly, Rear Driver Side Part Number: 5098678AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Driver Side
- Item Weight: 3.80 Pounds
- Item Dimensions: 15.5 x 12.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Tail Light Parts and Q&A

Q: How to Replace a Tail Light Unit on 2004 Chrysler Crossfire?
A: Before changing the tail lamp unit, remove the negative battery cable first. Following this, take out the access panel from the inside trim panel, cut the connector for the tail lamp unit and remove the nuts holding it in place. For installation, put the tail lamp into the rear body panel and tighten the retaining nuts to keep it fixed. Afterward, join the harness connector, replace the rear access panel inside the vehicle's interior panel and attach the negative battery cable.