How to Replace a Rear Wiper Motor on 2004 Chrysler Pacifica?

Reading the instructions should remove the negative cable of the battery, wiper arm and liftgate trim, and electrical connector of the motor in order to replace the rear wiper motor. Take out the motor screws, install the new motor, reconnect the electrical connector, reassemble the trim and check that it works once the battery is reconnected.

OEM 2004 Chrysler Pacifica Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2004 Chrysler Pacifica Wiper Motor Part Number: 5102228AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Chrysler Pacifica Wiper Motor Part Number: 4894283AC
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: 4894283AB, 4894283AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894283AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2004 Chrysler Pacifica Wiper Motor Parts and Q&A

Q: How to Replace a Rear Wiper Motor on 2004 Chrysler Pacifica?
A: Reading the instructions should remove the negative cable of the battery, wiper arm and liftgate trim, and electrical connector of the motor in order to replace the rear wiper motor. Take out the motor screws, install the new motor, reconnect the electrical connector, reassemble the trim and check that it works once the battery is reconnected.