How to Service an Oil Filter on 2004 Chrysler PT Cruiser?

To service oil filter Use band strap tool check for deformation. Remove the filter counterclockwise with a wrench then clean the mounting surface. Lubricate the gasket of the new filter, screw on to make contact with the base and tighten to 21 Nm (15 ft. lbs.).

OEM 2004 Chrysler PT Cruiser Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2004 Chrysler PT Cruiser Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4105409AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler PT Cruiser Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781452BF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2004 Chrysler PT Cruiser Oil Filter Parts and Q&A

Q: How to Service an Oil Filter on 2004 Chrysler PT Cruiser?
A: To service oil filter Use band strap tool check for deformation. Remove the filter counterclockwise with a wrench then clean the mounting surface. Lubricate the gasket of the new filter, screw on to make contact with the base and tighten to 21 Nm (15 ft. lbs.).