How to Service and Repair a Power Steering Hose on 2004 Chrysler Sebring?

First, turn off the engine, let the power steering, engine parts and exhaust system cool and only then start service or repair work on the power steering supply hose. Cap the ends of each hose, fitting and port to ensure they aren't contaminated. To start, pull out the ground cable connected to the left shock tower and put it through an isolator. Remove as much fluid from the reservoir as possible, unscrew the reservoir from the engine coolant bottle and lift it free of the guide. Second, take off the hose clamp that holds the supply hose to the reservoir, detach the hose and remove the clamp and hose from the supply fitting on the pump. Remove the old hose and connect the replacement hose to the fitting at the power steering pump. Finally, secure it with a clamp in a position past the upset bead. Followed by that, affix the supply hose to the reservoir, secure it with a clamp and tighten everything carefully. Align the reservoir in its slot and fix it with the screw. Tighten it by hand until you reach 6 Nm (53 inch lbs.). Reattach the remote battery ground cable to the left shock tower ground stud, add power steering fluid up to the correct line, run the engine for a little while and then turn it off. Recharge the reservoir to the proper level, then go on to complete the Power Steering Pump Initial Operation procedure, watching for leaks.

OEM 2004 Chrysler Sebring Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Power Steering Hoses found

View related parts
2004 Chrysler Sebring Power Steering Return Hose Part Number: 4879218AF
$12.20 MSRP: $17.50
You Save: $5.30 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Hose; Reservoir Hose; Return Hose; Upper Return Hose
- Replaces: 4879218AD, 4879218AE
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4879218AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Reservoir Hose Part Number: 4764716AI
$34.19 MSRP: $48.20
You Save: $14.01 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose
- Replaces: 4764716AH, 4764716AC, 4764716AG, 4764716AD
- Item Weight: 1.50 Pounds
- Item Dimensions: 18.5 x 15.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764716AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Power Steering Oil Cooler, Front Lower Part Number: 4879238AG
$33.24 MSRP: $95.35
You Save: $62.11 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Line, Front Lower; Power Steering Cooler; Power Steering Hose; Lower Return Hose
- Position: Front Lower
- Replaces: 4879238AD, 4879238AE, 4879238AC
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4879238AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Power Steering Pressure Hose Part Number: 4764719AE
$50.50 MSRP: $108.00
You Save: $57.50 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4764719AC, 4764719AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 40.1 x 27.6 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764719AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Power Steering Pressure Hose Part Number: MR272247
$72.48 MSRP: $91.89
You Save: $19.41 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Pressure Hose; Hose Power Steering Pressure
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR272247
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Power Steering Return Hose Part Number: MR333811
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Hose; Lower Return Hose; Hose Power Steering Return
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR333811
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Power Steering Return Hose Part Number: MR333810
Product Specifications
- Other Name: Line - Power Steering Return; Lower Return Hose; Hose Power Steering Return
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR333810
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler Sebring Power Steering Return Hose Part Number: MR333806
Product Specifications
- Other Name: Line - Power Steering Return; Center Return Hose; Upper Return Hose; Hose Power Steering Return
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR333806
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Center Return Hose Part Number: MR297550
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Return Hose; Upper Return Hose; Hose Power Steering Return
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR297550
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Power Steering Pressure Hose Part Number: MR130914
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose; Hose Power Steering Pressure
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR130914
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler Sebring Reservoir Hose Part Number: 4764419AB
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Reservoir Hose; Power Steering Hose; Gear Assembly; Power Steering Suction Hose; Hose Power Steering Reservoir
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.7 x 4.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764419AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Power Steering Pressure Hose Part Number: 4764446AE
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4764446AD, 4764446AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 40.7 x 9.5 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764446AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2004 Chrysler Sebring Power Steering Hose Parts and Q&A

Q: How to Service and Repair a Power Steering Hose on 2004 Chrysler Sebring?
A: First, turn off the engine, let the power steering, engine parts and exhaust system cool and only then start service or repair work on the power steering supply hose. Cap the ends of each hose, fitting and port to ensure they aren't contaminated. To start, pull out the ground cable connected to the left shock tower and put it through an isolator. Remove as much fluid from the reservoir as possible, unscrew the reservoir from the engine coolant bottle and lift it free of the guide. Second, take off the hose clamp that holds the supply hose to the reservoir, detach the hose and remove the clamp and hose from the supply fitting on the pump. Remove the old hose and connect the replacement hose to the fitting at the power steering pump. Finally, secure it with a clamp in a position past the upset bead. Followed by that, affix the supply hose to the reservoir, secure it with a clamp and tighten everything carefully. Align the reservoir in its slot and fix it with the screw. Tighten it by hand until you reach 6 Nm (53 inch lbs.). Reattach the remote battery ground cable to the left shock tower ground stud, add power steering fluid up to the correct line, run the engine for a little while and then turn it off. Recharge the reservoir to the proper level, then go on to complete the Power Steering Pump Initial Operation procedure, watching for leaks.