How to Install a Power Steering Hose on Chrysler Sebring?

Like for the power steering supply hose, put the return hose into the engine compartment, position it with the routing clamp screw and secure it to the body. After raising and supporting the vehicle, fasten the return hose to the frame rail with the routing clamp screw, tighten to 8 Nm (71 in. lbs.). Then, put the return hose screws into the frame rail holes and tighten them to 8 Nm (71 in. lbs.). Attach the hose from the air conditioner to the cooler line and clamp it either side. Put the hose where it should exit the return tube and tighten it with a clamp, using a screw-clamp if you have one and tightening it to 2.5 Nm (20 in. lbs.). Slide the lower fascia valance and, if your engine requires it, the belly pan, into position. Move the vehicle to the ground and place the coolant recovery bottle and power steering fluid reservoir. First bleed the power steering, then ensure there are no leaks.

How to Service and Repair a Power Steering Hose for a 2.0L/2.4L Engine on Chrysler Sebring?

Before repairing or servicing the power steering line and hose in vehicles with 2.0L/2.4L engines, distance the power steering fluid hoses from the exhaust system, driveshafts and anything else that might rub against them. Slip the pressure hose fitment onto the gear and screw the tube nut to 32 Nm (24 ft. lbs.). Attach the hose routing clamps to the crossmember and fasten them with screws turned until they reach 8 Nm (71 in. lbs.). Attach the routing clamp to the right side of the crossmember and fasten its screw to 8 Nm (71 in. lbs.). Slide the return hose into the return tube and bring down the car or truck. After that, connect the pressure hose to the pump pressure port and use an 8mm adjustable wrench to tighten the tube nut to 32 Nm (24 ft. lbs.). Attach the pressure hose bracket bolt to the top mount, fill and add fluid to the power steering system, look for leaks and then finish with installing the engine appearance cover.

OEM Chrysler Sebring Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Power Steering Hoses found

View related parts
Chrysler Sebring Power Steering Return Hose Part Number: 68143978AB
$91.43 MSRP: $140.00
You Save: $48.57 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Hose Power Steering Return Includes Both Brackets; Hose Power Steering Return
- Replaces: 5085546AF, 5085546AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: 4879218AF
$12.20 MSRP: $17.50
You Save: $5.30 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Hose; Reservoir Hose; Return Hose; Upper Return Hose
- Replaces: 4879218AD, 4879218AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Reservoir Hose Part Number: 4764716AI
$34.19 MSRP: $48.20
You Save: $14.01 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose
- Replaces: 4764716AH, 4764716AC, 4764716AG, 4764716AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: 4695829
$34.14 MSRP: $43.28
You Save: $9.14 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Reservoir; Power Steering Hose; Reservoir Hose; Power Steering Return Tube Assembly to Reservoir (W/Bracket)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Power Steering Oil Cooler, Front Lower Part Number: 4879238AG
$33.24 MSRP: $95.35
You Save: $62.11 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Line, Front Lower; Power Steering Cooler; Power Steering Hose; Lower Return Hose
- Position: Front Lower
- Replaces: 4879238AD, 4879238AE, 4879238AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Power Steering Pressure Hose Part Number: 4764719AE
$50.50 MSRP: $108.00
You Save: $57.50 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4764719AC, 4764719AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Power Steering Pressure Hose Part Number: 5154721AE
$117.92 MSRP: $175.00
You Save: $57.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 5272817AC, 5272817AG, 5154721AA, 5154721AC, 5272817AE, 5272817AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Return Hose Part Number: 68143979AB
$56.93 MSRP: $83.95
You Save: $27.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose
- Replaces: 5085327AB, 5085327AE, 5085327AF, 5085327AC, 5085327AG, 5085327AA, 68143979AA, 5085327AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Power Steering Pressure Hose Part Number: 5085449AF
$130.82 MSRP: $180.00
You Save: $49.18 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 5085449AB, 5085449AC, 5085449AE, 5085449AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Upper Pressure Tube Part Number: MB911566
$5.35 MSRP: $6.78
You Save: $1.43 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line Power Steering Pressure; Power Steering Hose; Hose Power Steering Pressure; Tube, Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Return Hose Part Number: 4695827
$64.45 MSRP: $81.70
You Save: $17.25 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Power Steering Cooler; Power Steering Hose; Tube; Cooler Assembly, Power Steering; Hose Power Steering Return; Tube Power Steering Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Power Steering Pressure Hose Part Number: MR272247
$72.48 MSRP: $91.89
You Save: $19.41 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Pressure Hose; Hose Power Steering Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: MR333811
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Hose; Lower Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: MR333810
Product Specifications
- Other Name: Line - Power Steering Return; Lower Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: MR333806
Product Specifications
- Other Name: Line - Power Steering Return; Center Return Hose; Upper Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Center Return Hose Part Number: MR297550
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Return Hose; Upper Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Power Steering Pressure Hose Part Number: MR130914
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose; Hose Power Steering Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Lower Return Tube Part Number: MB911565
Product Specifications
- Other Name: Line Power Steering Return; Hose Power Steering Return; Tube, Return Gear To Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: MB911562
Product Specifications
- Other Name: Line Power Steering Return; Reservoir Hose; Lower Return Hose; Hose Power Steering Return; Hose, Return To Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Power Steering Return Hose Part Number: MB911561
Product Specifications
- Other Name: Line Power Steering Return; Power Steering Hose; Return Hose; Center Return Hose; Upper Return Hose; Hose, Return To Cooler To Gear; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

Chrysler Sebring Power Steering Hose

Choose OEM Power Steering Hose that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Power Steering Hose follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Power Steering Hose is one of the many parts that fuel the efficiency and reliability of Chrysler Sebring cars by creating the right angle of the power steering. This key hose helps the flow of the hydraulic fluids between the pump and the gear which makes it easy to steer the car. The Chrysler Company has in the past developed different styles in the power steering hose for the sebring model which include the following; the use of rubber hoses and assemblies that use pre-bent metal tubing and others. They are connection fitted at both the end while the low pressure return hoses are also unique in their design for the optimum results. Despite this Chrysler Sebring Car Part being seemingly just another component that performs a largely mechanical role in a car's motion, it is an extremely vital component in as much as concern for car safety goes since it eliminates instances of steering complications occasioned by fluid leakage or wear. Standard problems including leakage may cause extra steering effort or high pitch pump noise, consequently, proper installation and correct routing of new hydraulic hoses are critical. Chrysler brand Sebring is manufactured for a duration of 16 years providing its immovable stability in mid-size cars department, and the Power Steering Hose is not exception. This hose holds the capability to fit in to the numerous types of sebring model which makes it unique in the automobile industry and it's duration and effectiveness to ensure that the drivers are assured of their safety and response in their automobiles.

Chrysler Sebring Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
5085449AF
Q: How to Install a Power Steering Hose on Chrysler Sebring?
A:
Like for the power steering supply hose, put the return hose into the engine compartment, position it with the routing clamp screw and secure it to the body. After raising and supporting the vehicle, fasten the return hose to the frame rail with the routing clamp screw, tighten to 8 Nm (71 in. lbs.). Then, put the return hose screws into the frame rail holes and tighten them to 8 Nm (71 in. lbs.). Attach the hose from the air conditioner to the cooler line and clamp it either side. Put the hose where it should exit the return tube and tighten it with a clamp, using a screw-clamp if you have one and tightening it to 2.5 Nm (20 in. lbs.). Slide the lower fascia valance and, if your engine requires it, the belly pan, into position. Move the vehicle to the ground and place the coolant recovery bottle and power steering fluid reservoir. First bleed the power steering, then ensure there are no leaks.
Power Steering Return Hose
68143978AB
Q: How to Service and Repair a Power Steering Hose for a 2.0L/2.4L Engine on Chrysler Sebring?
A:
Before repairing or servicing the power steering line and hose in vehicles with 2.0L/2.4L engines, distance the power steering fluid hoses from the exhaust system, driveshafts and anything else that might rub against them. Slip the pressure hose fitment onto the gear and screw the tube nut to 32 Nm (24 ft. lbs.). Attach the hose routing clamps to the crossmember and fasten them with screws turned until they reach 8 Nm (71 in. lbs.). Attach the routing clamp to the right side of the crossmember and fasten its screw to 8 Nm (71 in. lbs.). Slide the return hose into the return tube and bring down the car or truck. After that, connect the pressure hose to the pump pressure port and use an 8mm adjustable wrench to tighten the tube nut to 32 Nm (24 ft. lbs.). Attach the pressure hose bracket bolt to the top mount, fill and add fluid to the power steering system, look for leaks and then finish with installing the engine appearance cover.