How to Replace a Wiper Motor Assembly on 2004 Chrysler Sebring?

In order to change the wiper motor assembly, disconnect battery and take off wiper arms, blades and cowl screen. Take the motor assembly off, undo the harness and take out. To install, reconnect the harness, and re-install components. Lastly, rearrange battery and check operation, after which wiper arms may be adjusted.

OEM 2004 Chrysler Sebring Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2004 Chrysler Sebring Wiper Motor Part Number: 5101863AB
$126.95 MSRP: $146.00
You Save: $19.05 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor
- Replaces: 5101863AA
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101863AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Wiper Motor Part Number: MR987767
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Motor Windshield Wiper
- Item Weight: 13.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR987767
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2004 Chrysler Sebring Wiper Motor Parts and Q&A

Q: How to Replace a Wiper Motor Assembly on 2004 Chrysler Sebring?
A: In order to change the wiper motor assembly, disconnect battery and take off wiper arms, blades and cowl screen. Take the motor assembly off, undo the harness and take out. To install, reconnect the harness, and re-install components. Lastly, rearrange battery and check operation, after which wiper arms may be adjusted.