How to Service and Repair a Transmission Speed Sensor for Output on 2004 Chrysler Town & Country?

For transmission speed sensor maintenance, start by removing the battery negative cable and then safely lift the vehicle up with a hoist. Then, unhook the output speed sensor connector and remove the output speed sensor by unscrewing it, after which you should examine the speed sensor's o-ring and change it out if it's damaged. When putting in the speed sensor, correct the o-ring's placement, install and tighten the sensor to a torque of 27 Nm (20 ft. lbs.). After you are done, put the speed sensor harness in place and hook up the other end of the negative battery cable.

OEM 2004 Chrysler Town & Country Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Speed Sensor found

View related parts
2004 Chrysler Town & Country Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2004 Chrysler Town & Country Speed Sensor Parts and Q&A

Q: How to Service and Repair a Transmission Speed Sensor for Output on 2004 Chrysler Town & Country?
A: For transmission speed sensor maintenance, start by removing the battery negative cable and then safely lift the vehicle up with a hoist. Then, unhook the output speed sensor connector and remove the output speed sensor by unscrewing it, after which you should examine the speed sensor's o-ring and change it out if it's damaged. When putting in the speed sensor, correct the o-ring's placement, install and tighten the sensor to a torque of 27 Nm (20 ft. lbs.). After you are done, put the speed sensor harness in place and hook up the other end of the negative battery cable.