JeepParts
My Garage
My Account
Cart
OEM 2004 Dodge Caravan Air Duct
Air Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Air Ducts found
2004 Dodge Caravan Hose Part Number: 4861414AB
Product Specifications- Other Name: Hose - Air Cleaner To Throttle Body; Engine Air Intake Hose; Intake Coupling; Hose Air Cleaner To Throttle Body; Air Intake Hose
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.9 x 6.3 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861414AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Caravan Hose Part Number: 4861415AB
Product Specifications- Other Name: Hose - Air Cleaner To Throttle Body; Engine Air Intake Hose; Intake Coupling; Hose Air Cleaner To Throttle Body; Air Intake Hose
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.9 x 8.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861415AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Caravan Air Inlet Duct Part Number: 4880445AA
Product Specifications- Other Name: Duct - Fresh Air; Engine Air Intake Hose; Intake Coupling; Duct Fresh Air; Air Intake Hose
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 9.9 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4880445AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Caravan Air Duct Parts and Q&A
- Q: How to Service and Repair the Air Duct for the Supplemental Cabin Heater on 2004 Dodge Caravan?A: Before servicing or repairing the auxiliary cabin heater's air intake pipe, drain the engine cooling system. Disconnect the clamps at the lower heater tube and lower EGR tube on the car beneath the hood, then also take off the clamp on the cabin heater air intake muffler. After that, free the clamp that connects the flexible tube to the steel tube and remove the two retaining screws to get rid of the cabin heater air intake and heater pipe assembly. Initial installation requires placing the air intake pipe assembly and tightening the two retaining screws, each at a torque of 7 Nm (62 in. lbs.). Join the steel tube to the flexible tube, position everything and lock the retaining clamp firmly in place. Attach the flexible tube to the cabin heater air intake muffler and put and tighten the clamp to keep it in place. Attach the cabin heater tubes to both ends of the lower heater and EGR cooler connections once again, tightening the retaining clamps. Lift the vehicle a little, top off the engine cooling fluid and turn on the cabin heater to make sure it works.
Related 2004 Dodge Caravan Parts
2004 Dodge Caravan Fuel Pump
2004 Dodge Caravan Gas Cap
2004 Dodge Caravan Air Filter
2004 Dodge Caravan Fuel Tank
2004 Dodge Caravan Air Intake Coupling
2004 Dodge Caravan Fuel Filler Neck
2004 Dodge Caravan Fuel Level Sensor
2004 Dodge Caravan Fuel Pressure Regulator
2004 Dodge Caravan Fuel Pump Gasket
2004 Dodge Caravan Fuel Pump Seal
2004 Dodge Caravan Fuel Tank Lock Ring
2004 Dodge Caravan Fuel Tank Strap