Should Brake Discs Be Resurfaced with Every Brake Pad Replacement, and What Are the Guidelines on 2004 Dodge Grand Caravan?

Although brake discs do not always have to be refaced, it should happen if the discs are deeply grooved, bent or if people notice roughness or pulsation in their brakes. This job should be done with a brake lathe on a car hub, since this helps keep runout to a minimum when it starts on the vehicle's hub and bears. The minimum allowable thickness of all discs is shown on an un-machined surface and must not be reduced during machining. Inspect the brake disc and both the hub adapter for chips, rust or other contaminants before installation. Working with the brake lathe, refer to the guidelines from the manufacturer and machine both sides at the same time so you get a balanced result. The TIR and thickness variation must be maintained within the required range throughout refacing and the requirements to machine brake discs can be found in the brake disc manufacturer's specification.

OEM 2004 Dodge Grand Caravan Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2004 Dodge Grand Caravan Rotor, Front Part Number: 4721830AC
$120.59 MSRP: $221.00
You Save: $100.41 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Front
- Replaces: 5019981AB
- Item Weight: 16.90 Pounds
- Item Dimensions: 11.9 x 11.4 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721830AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Dodge Grand Caravan Rotor, Front Part Number: 4721820AG
$138.13 MSRP: $207.00
You Save: $68.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 4721820AF
- Item Weight: 17.40 Pounds
- Item Dimensions: 13.7 x 13.8 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721820AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Dodge Grand Caravan Rotor, Rear Part Number: 4721023AG
$62.94 MSRP: $94.10
You Save: $31.16 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4721023AE, 4721023AF
- Item Weight: 12.20 Pounds
- Item Dimensions: 12.0 x 11.9 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721023AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2004 Dodge Grand Caravan Brake Disc Parts and Q&A

Q: Should Brake Discs Be Resurfaced with Every Brake Pad Replacement, and What Are the Guidelines on 2004 Dodge Grand Caravan?
A: Although brake discs do not always have to be refaced, it should happen if the discs are deeply grooved, bent or if people notice roughness or pulsation in their brakes. This job should be done with a brake lathe on a car hub, since this helps keep runout to a minimum when it starts on the vehicle's hub and bears. The minimum allowable thickness of all discs is shown on an un-machined surface and must not be reduced during machining. Inspect the brake disc and both the hub adapter for chips, rust or other contaminants before installation. Working with the brake lathe, refer to the guidelines from the manufacturer and machine both sides at the same time so you get a balanced result. The TIR and thickness variation must be maintained within the required range throughout refacing and the requirements to machine brake discs can be found in the brake disc manufacturer's specification.