How to Service a MAP Sensor on 2004 Dodge Intrepid?

To service the Manifold Pressure/Vacuum Sensor, disconnect the negative battery cable and the electrical connection. Remove the bolt of the sensor and remove the sensor. For installing it, place the new sensor, adjust screws to 4.5N.m (40 in.lbs.), reconnect electrical connector and reattach battery cable.

OEM 2004 Dodge Intrepid MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Dodge Intrepid M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2004 Dodge Intrepid MAP Sensor Parts and Q&A

Q: How to Service a MAP Sensor on 2004 Dodge Intrepid?
A: To service the Manifold Pressure/Vacuum Sensor, disconnect the negative battery cable and the electrical connection. Remove the bolt of the sensor and remove the sensor. For installing it, place the new sensor, adjust screws to 4.5N.m (40 in.lbs.), reconnect electrical connector and reattach battery cable.