How to Service an Oil Pressure Switch on 2004 Dodge Intrepid?

Start by lifting the vehicle on a hoist and under the switch place an oil collecting container to catch the oil. Unplug the electrical connector and then remove the switch by unscrewing it off the engine block. When putting in the switch, cover the threads with Mopar Thread Sealant, add the switch and complete by plugging in the electrical connector. Raise or lower the vehicle depending on your service book instructions, run the engine, review for leaks and keep your engine oil at the appropriate level.

OEM 2004 Dodge Intrepid Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2004 Dodge Intrepid Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2004 Dodge Intrepid Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2004 Dodge Intrepid?
A: Start by lifting the vehicle on a hoist and under the switch place an oil collecting container to catch the oil. Unplug the electrical connector and then remove the switch by unscrewing it off the engine block. When putting in the switch, cover the threads with Mopar Thread Sealant, add the switch and complete by plugging in the electrical connector. Raise or lower the vehicle depending on your service book instructions, run the engine, review for leaks and keep your engine oil at the appropriate level.