How to Install a Power Steering Reservoir on 2004 Dodge Intrepid?

To install the power steering reservoir, lubricate the O-ring with power steering fluid. Press the nipple of the reservoir into the pump without twisting. Tighten the three mounting bolts one, the pulley side, to 13 Nm and the rear bolts to 24 Nm. Lastly, install the power steering pump on the engine.

OEM 2004 Dodge Intrepid Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Reservoirs found

View related parts
2004 Dodge Intrepid Reservoir Part Number: 4772456AD
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.3 x 6.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4772456AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Reservoir Part Number: 5011239AA
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.8 x 6.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2004 Dodge Intrepid Power Steering Reservoir Parts and Q&A

Q: How to Install a Power Steering Reservoir on 2004 Dodge Intrepid?
A: To install the power steering reservoir, lubricate the O-ring with power steering fluid. Press the nipple of the reservoir into the pump without twisting. Tighten the three mounting bolts one, the pulley side, to 13 Nm and the rear bolts to 24 Nm. Lastly, install the power steering pump on the engine.