How to Service and Repair a Door Lock Switch on 2004 Dodge Neon?

To repair the door lock switch, you must remove the door trim panel, remove the illuminated entry switch wiring clip and disconnect the connector. Remove the door lock switch, reinstall the lock switch, reinstall the wiring clip and connector, and install the door trim panel.

OEM 2004 Dodge Neon Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2004 Dodge Neon Lock Switch, Front Driver Side Part Number: 4793579AB
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front Left; Switch Door Lock; Door Lock Switch
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793579AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon Window Switch Part Number: 4685435
Product Specifications
- Other Name: Switch - Power Door; Door Window Switch; Door Lock Switch; Lock Switch; Switch; Switch, W/Bezel, Power Window/Lock, Right, Cirrus; Switch Power Door; Switch Console
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685435
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2004 Dodge Neon Door Lock Switch Parts and Q&A

Q: How to Service and Repair a Door Lock Switch on 2004 Dodge Neon?
A: To repair the door lock switch, you must remove the door trim panel, remove the illuminated entry switch wiring clip and disconnect the connector. Remove the door lock switch, reinstall the lock switch, reinstall the wiring clip and connector, and install the door trim panel.