How to Service and Repair a Door Lock Switch on 2005 Dodge Neon?

To work on the door lock switch, you should remove the door trim panel first. After that, unclip the illuminated entry switch wiring and remove the connector. After that, remove the door lock switch from the door handle. Put the door lock switch into the door handle first and after that, reattach the illuminated entry switch wiring clip and connector. When you've finished, set the door trim panel back in place.

OEM 2005 Dodge Neon Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2005 Dodge Neon Window Switch Part Number: 4685435
Product Specifications
- Other Name: Switch - Power Door; Door Window Switch; Door Lock Switch; Lock Switch; Switch; Switch, W/Bezel, Power Window/Lock, Right, Cirrus; Switch Power Door; Switch Console
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685435
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Lock Switch, Front Driver Side Part Number: 4793579AB
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front Left; Switch Door Lock; Door Lock Switch
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793579AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon Door Lock Switch Parts and Q&A

Q: How to Service and Repair a Door Lock Switch on 2005 Dodge Neon?
A: To work on the door lock switch, you should remove the door trim panel first. After that, unclip the illuminated entry switch wiring and remove the connector. After that, remove the door lock switch from the door handle. Put the door lock switch into the door handle first and after that, reattach the illuminated entry switch wiring clip and connector. When you've finished, set the door trim panel back in place.