How to Properly Bleed a Brake Master Cylinder on 2004 Dodge Ram 1500?

Installation of a new brake master cylinder should be preceded by bleeding it out with bleed tubes and a plain dowel to activate the pistons. Grasp the brake master cylinder in a vise and pair the open ends of the bleed tubes with each outlet port on the cylinder, immersing the tube ends into the reservoir. Put in brake fluid after the reservoir is clean, then push each cylinder piston in using the wood dowel and then release them to allow them to come back up. Constantly mix the fluid until there are no bubbles left within it.

OEM 2004 Dodge Ram 1500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2004 Dodge Ram 1500 Master Cylinder Part Number: 5102032AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.6 x 9.9 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102032AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2004 Dodge Ram 1500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.1 x 9.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080888AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Ram 1500 Brake Master Cylinder Parts and Q&A

Q: How to Properly Bleed a Brake Master Cylinder on 2004 Dodge Ram 1500?
A: Installation of a new brake master cylinder should be preceded by bleeding it out with bleed tubes and a plain dowel to activate the pistons. Grasp the brake master cylinder in a vise and pair the open ends of the bleed tubes with each outlet port on the cylinder, immersing the tube ends into the reservoir. Put in brake fluid after the reservoir is clean, then push each cylinder piston in using the wood dowel and then release them to allow them to come back up. Constantly mix the fluid until there are no bubbles left within it.