How to Remove and Reinstall a Battery Sensor on 2004 Dodge Ram 2500?

The battery temperature sensor must first be uninstalled when you take out the battery-it is situated under the battery, connected to a hole in the battery tray. When the battery is clear, lift the sensor straight up from its spot on the battery tray and remove the electric connector from the sensor. To install, take the electrical connector through the top hole in the battery tray, attach the sensor, slide it into the tray and finally set the battery back into place.

OEM 2004 Dodge Ram 2500 Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2004 Dodge Ram 2500 Temperature Sensor Part Number: 56041053
$60.49 MSRP: $90.65
You Save: $30.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Battery Temperature; Battery Temperature Sensor; Battery Current Sensor; Sensor; Sensor Battery Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.9 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041053
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2004 Dodge Ram 2500 Battery Sensor Parts and Q&A

Q: How to Remove and Reinstall a Battery Sensor on 2004 Dodge Ram 2500?
A: The battery temperature sensor must first be uninstalled when you take out the battery-it is situated under the battery, connected to a hole in the battery tray. When the battery is clear, lift the sensor straight up from its spot on the battery tray and remove the electric connector from the sensor. To install, take the electrical connector through the top hole in the battery tray, attach the sensor, slide it into the tray and finally set the battery back into place.