How to Service and Repair a Front Parking Brake Cable on 2004 Dodge Ram 2500?

Before servicing or repairing the front parking brake cable, make sure to raise and support the vehicle, lock the parking brake cable and untighten the adjusting nut to create some freedom of movement in the front cable. Take out the front cable from its connector, squeeze the cable fitting at the underbody bracket and pull the cable away from the bracket. Reduce the suspension, then use a small screwdriver to push the end of the cable out of the clevis on the pedal. Squeeze the cable end fitting on the pedal bracket and take out the cable. After that, undo the left cowl trim and sill plate, lift up the carpet and move the cable off the body clip. Next, pull up on the cable along with the body grommet to remove both. To fit the cable, push the end into the pedal assembly hole from inside, put the cable retainer on the assembly and secure it with the cable ball on the clevis. Feed the cable into the floor pan via the grommet and after that lay down the carpet and set back both the left cowl trim and sill plate. Again raise and support the vehicle, feed the cable through the underbody bracket and slide the cable end fitting into the bracket before hooking up the cable to the cable connector. After that, do the park brake adjustment and bring the vehicle to the ground.

OEM 2004 Dodge Ram 2500 Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2004 Dodge Ram 2500 Parking Brake Cable, Rear Passenger Side Part Number: 52121102AC
$73.98 MSRP: $111.00
You Save: $37.02 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Parking Brake Cable, Rear Left, Rear Right; Rear Cable; Cable Parking Brake; Brake Cable
- Position: Rear Passenger Side
- Replaces: 52121102AB, 52121102AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 83.2 x 25.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121102AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
2004 Dodge Ram 2500 Parking Brake Cable, Rear Driver Side Part Number: 52121101AC
$76.49 MSRP: $115.00
You Save: $38.51 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Parking Brake Cable, Rear Left; Rear Cable; Cable Parking Brake; Brake Cable
- Position: Rear Driver Side
- Replaces: 52121101AA, 52121101AB
- Item Weight: 1.70 Pounds
- Item Dimensions: 25.0 x 14.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121101AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
2004 Dodge Ram 2500 Parking Brake Cable, Rear Passenger Side Part Number: 52010294AD
$167.68 MSRP: $247.00
You Save: $79.32 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Parking Brake Cable, Rear Right; Rear Cable; Cable Parking Brake; Brake Cable
- Position: Rear Passenger Side
- Replaces: 52010294AB, 52010294AC, 52010294AA
- Item Weight: 4.30 Pounds
- Item Dimensions: 28.6 x 17.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010294AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
2004 Dodge Ram 2500 Front Cable Part Number: 52010133AC
$46.01 MSRP: $68.40
You Save: $22.39 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Parking Brake Cable, Front; Cable Parking Brake; Brake Cable
- Position: Front
- Item Weight: 1.10 Pounds
- Item Dimensions: 22.7 x 12.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010133AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Parking Brake Cable, Rear Driver Side Part Number: 52010414AE
$106.71 MSRP: $160.00
You Save: $53.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Parking Brake Cable, Rear Left, Rear Right; Rear Cable; Cable Parking Brake; Brake Cable
- Position: Rear Driver Side
- Replaces: 52010414AB, 52010414AD, 52010414AC
- Item Weight: 3.20 Pounds
- Item Dimensions: 0.7 x 26.5 x 30.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010414AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2004 Dodge Ram 2500 Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Front Parking Brake Cable on 2004 Dodge Ram 2500?
A: Before servicing or repairing the front parking brake cable, make sure to raise and support the vehicle, lock the parking brake cable and untighten the adjusting nut to create some freedom of movement in the front cable. Take out the front cable from its connector, squeeze the cable fitting at the underbody bracket and pull the cable away from the bracket. Reduce the suspension, then use a small screwdriver to push the end of the cable out of the clevis on the pedal. Squeeze the cable end fitting on the pedal bracket and take out the cable. After that, undo the left cowl trim and sill plate, lift up the carpet and move the cable off the body clip. Next, pull up on the cable along with the body grommet to remove both. To fit the cable, push the end into the pedal assembly hole from inside, put the cable retainer on the assembly and secure it with the cable ball on the clevis. Feed the cable into the floor pan via the grommet and after that lay down the carpet and set back both the left cowl trim and sill plate. Again raise and support the vehicle, feed the cable through the underbody bracket and slide the cable end fitting into the bracket before hooking up the cable to the cable connector. After that, do the park brake adjustment and bring the vehicle to the ground.