JeepParts
My Garage
My Account
Cart
OEM 2004 Jeep Grand Cherokee Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Catalytic Converters found
2004 Jeep Grand Cherokee Catalytic Converter Part Number: 52080369AA
Product Specifications- Other Name: Converter - Catalytic; Converter Catalytic
- Item Weight: 14.70 Pounds
- Item Dimensions: 52.5 x 7.1 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52080369AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Catalytic Converter Part Number: 52080439AA
Product Specifications- Other Name: Converter - Catalytic; Converter Catalytic
- Item Weight: 14.30 Pounds
- Item Dimensions: 32.6 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52080439AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Front Pipe Part Number: 52080358AA
Product Specifications- Other Name: Converter - Exhaust; Exhaust Crossover Pipe; Catalytic Converter; Exhaust Pipe; Pipe And Converter Exhaust To Manifold
- Item Weight: 19.50 Pounds
- Item Dimensions: 35.4 x 24.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52080358AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Catalytic Converter Parts and Q&A
- Q: How to Maintain a Catalytic Converter on a 4.0L Engine on 2004 Jeep Grand Cherokee?A: Service of the catalytic converter for a 4.0L engine should start with raising and supporting the vehicle. Add some heat valve lubricant to the bolts and nuts, then wait 5 minutes before you remove the nuts from the link between the catalytic converter and exhaust pipe flange. Unfasten the clamp at the converter and muffler intersection and separate the wire connection to the oxygen sensor. Heat up the connection between the catalytic converter and the muffler using a torch until the metal glows cherry red, then keep turning the catalytic converter until it separates from the muffler and exhaust pipe. See if the disease of the stainless steel body is due to heating it up and inspect any heat shield to ensure it is intact and not bent. Worries about internal issues can be resolved by gently tapping the bottom of the catalyst with a rubber mallet. Attach the catalytic converter to the end of the exhaust pipe and tighten its nuts just to 28 Nm (250 in. lbs.) Now, fit the muffler over the catalytic converter, aligning the groove on the muffler with the slot on the converter and bolt the exhaust clamp securely at those parts, tightening the clamp nuts to 35 ft. lbs. torque. Connect the oxygen sensor wires, set the vehicle on the ground, start the engine and check for exhaust problems against the body panels.
Related 2004 Jeep Grand Cherokee Parts
2004 Jeep Grand Cherokee Exhaust Pipe
2004 Jeep Grand Cherokee Muffler
2004 Jeep Grand Cherokee Canister Purge Valve
2004 Jeep Grand Cherokee Exhaust Manifold
2004 Jeep Grand Cherokee PCV Valve
2004 Jeep Grand Cherokee Vapor Canister
2004 Jeep Grand Cherokee Exhaust Hanger
2004 Jeep Grand Cherokee Exhaust Heat Shield
2004 Jeep Grand Cherokee Exhaust Manifold Gasket
2004 Jeep Grand Cherokee Secondary Air Injection Check Valve
2004 Jeep Grand Cherokee Tail Pipe