How to Replace a Front Wiper Arm on 2004 Jeep Wrangler?

To replace front wiper arms, support (but not distort) the arm by lifting it upward so that the latch will release. Remove the pivot end using a rocking motion. Make sure that the wiper motor is in park before indexing the arms. Adjust the position, lock the latch and test the wipers to see if they are in proper alignment.

OEM 2004 Jeep Wrangler Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Arms found

View related parts
2004 Jeep Wrangler Wiper Arm Part Number: 55155658AB
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm; Arm Wiper
- Item Weight: 1.00 Pounds
- Item Dimensions: 15.8 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 55155658AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Jeep Wrangler Wiper Arm Part Number: 55156663AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Back Glass Wiper Arm; Arm Wiper
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.1 x 5.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156663AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2004 Jeep Wrangler Wiper Arm Parts and Q&A

Q: How to Replace a Front Wiper Arm on 2004 Jeep Wrangler?
A: To replace front wiper arms, support (but not distort) the arm by lifting it upward so that the latch will release. Remove the pivot end using a rocking motion. Make sure that the wiper motor is in park before indexing the arms. Adjust the position, lock the latch and test the wipers to see if they are in proper alignment.