JeepParts
My Garage
My Account
Cart
OEM 2004 Jeep Wrangler Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wiper Motors found
2004 Jeep Wrangler Wiper Motor, Front Part Number: 55156374AD
Product Specifications- Other Name: Module - Wiper; Windshield Wiper Linkage, Front; Wiper Linkage; Linkage Assembly; Front Transmission; Front Motor
- Position: Front
- Replaces: R5156374AC, 55156374AA, 55156374AC, 55156374AB
- Item Weight: 8.40 Pounds
- Item Dimensions: 29.3 x 9.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156374AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Wrangler Wiper Motor Part Number: 55156278AA
Product Specifications- Other Name: Motor - Windshield Wiper; Back Glass Wiper Motor; Front Motor; Rear Motor; Motor; Motor Windshield Wiper
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 7.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Wrangler Wiper Motor Parts and Q&A
- Q: How to Service and Repair a Wiper Motor and Its Rubber Boot on 2004 Jeep Wrangler?A: The first thing to do for a front wiper motor and rubber boot repair is to take out the front wiper module from the cowl plenum. After that, release the retainer that holds the wiper motor pigtail wire connector to the front wiper module bracket. Turn the front wiper module over, remove the nut holding the wiper motor crank arm to the wiper motor output shaft, then take out all three screws that secure the wiper motor to the bracket. When everything is removed, pull the wiper motor out from the front wiper module bracket. Put the wiper motor onto the front wiper module bracket and attach the three screws to 8 Nm (70 in. lbs.). After that, hold the wiper motor crank arm to the front wiper motor outlet shaft and screw on the nut until it reaches 12 Nm (101 in. lbs.). Engage the pop-rivets in the holders on the cowl plenum sides and then plug in the fuse link connected to the fuse relay socket in the underhood fuse panel 2 when this step is done.
Related 2004 Jeep Wrangler Parts
2004 Jeep Wrangler Fender
2004 Jeep Wrangler Instrument Cluster
2004 Jeep Wrangler Windshield Washer Nozzle
2004 Jeep Wrangler Wiper Arm
2004 Jeep Wrangler Windshield Wiper
2004 Jeep Wrangler Wiper Blade
2004 Jeep Wrangler Hood Hinge
2004 Jeep Wrangler Tailgate Handle
2004 Jeep Wrangler Washer Reservoir
2004 Jeep Wrangler Window Crank Handles
2004 Jeep Wrangler Window Run
2004 Jeep Wrangler Wiper Pivot