How to Repair and Maintain an Ignition Switch on 2005 Chrysler 300?

In order to fix the ignition switch, disconnect the negative cable of the battery, then unscrew the required panel and screws and then loosen the ignition switch. Installation of the new switch requires a fitting of the switch to the lock cylinder, reconnecting of wires, and re- fitting of the panels. Lastly, reconnect the negative cable and you are through.

OEM 2005 Chrysler 300 Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2005 Chrysler 300 Ignition Switch Part Number: 4685719AI
$67.84 MSRP: $94.40
You Save: $26.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition; Ignition Lock Cylinder; Ignition Cylinder; Switch Ignition
- Replaces: 4685719AC, 4685719AE, 4685719AD, 68033393AA, 4685719AH, 4685719AB, 4685719AG, 4685719AF
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Chrysler 300 Ignition Switch Part Number: 4685863AA
Product Specifications
- Other Name: Switch Ignition
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685863AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2005 Chrysler 300 Ignition Switch Parts and Q&A

Q: How to Repair and Maintain an Ignition Switch on 2005 Chrysler 300?
A: In order to fix the ignition switch, disconnect the negative cable of the battery, then unscrew the required panel and screws and then loosen the ignition switch. Installation of the new switch requires a fitting of the switch to the lock cylinder, reconnecting of wires, and re- fitting of the panels. Lastly, reconnect the negative cable and you are through.