How to Maintain the Wiper Arm on a Wagon's Rear Window on 2005 Chrysler 300?

Before you service the rear wiper arm on the wagon, remove the retaining nut (1) by first removing the nut cap (2). Using light pressure, twist the wiper arm back and forth on its shaft until it comes loose and then take it off (3). After installation, slide the wiper arm (3) into the shaft, tighten it with the retaining nut (1) to 18 N.m (13 ft. lbs.) and put on the nut cap (2).

OEM 2005 Chrysler 300 Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Arms found

View related parts
2005 Chrysler 300 Wiper Arm, Front Driver Side Part Number: 5139094AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Left; Front Arm
- Position: Front Driver Side
- Replaces: 5139094AA
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.2 x 4.2 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Chrysler 300 Wiper Arm, Front Passenger Side Part Number: 5139093AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Right; Front Arm
- Position: Front Passenger Side
- Replaces: 5139093AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.3 x 3.1 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139093AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2005 Chrysler 300 Wiper Arm Parts and Q&A

Q: How to Maintain the Wiper Arm on a Wagon's Rear Window on 2005 Chrysler 300?
A: Before you service the rear wiper arm on the wagon, remove the retaining nut (1) by first removing the nut cap (2). Using light pressure, twist the wiper arm back and forth on its shaft until it comes loose and then take it off (3). After installation, slide the wiper arm (3) into the shaft, tighten it with the retaining nut (1) to 18 N.m (13 ft. lbs.) and put on the nut cap (2).