How to Service the Side Marker Light on 2005 Chrysler Crossfire?

You should remove the negative battery cable before doing any work on the rear marker lamp. Gently push down on the rear marker lamp lens with a trim stick from the front and lift it up and out of the fascia. Please turn the socket counterclockwise to pull out the rear marker lamp bulb. To install, push the rear marker bulb into its socket and twist the bulb clockwise until it is positions inside the rear marker lamp lens. Install the left side of the rear marker lamp lens into the rear edge of the bumper, then press in the right edge at the front. Also, before closing up, reattach the negative battery cable.

OEM 2005 Chrysler Crossfire Side Marker Light

Side Marker Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Side Marker Lights found

View related parts
2005 Chrysler Crossfire Side Marker Lamp, Front Passenger Side Part Number: 5097518AA
Product Specifications
- Other Name: Lamp - Side Marker; Side Marker Light, Front Right; Side Marker Lights; Turn Signal Lights; Lamp Side Marker
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097518AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Side Marker Lamp Part Number: 5097520AA
Product Specifications
- Other Name: Lamp - Side Marker; Lamp Side Marker
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 1.8 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097520AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Side Marker Lamp, Front Driver Side Part Number: 5097519AA
Product Specifications
- Other Name: Lamp - Side Marker; Side Marker Light, Front Left; Side Marker Lights; Turn Signal Lights; Lamp Side Marker
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.6 x 3.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097519AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Side Marker Lamp Part Number: 5097521AA
Product Specifications
- Other Name: Lamp - Side Marker; Lamp Side Marker
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.8 x 3.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097521AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Side Marker Light Parts and Q&A

Q: How to Service the Side Marker Light on 2005 Chrysler Crossfire?
A: You should remove the negative battery cable before doing any work on the rear marker lamp. Gently push down on the rear marker lamp lens with a trim stick from the front and lift it up and out of the fascia. Please turn the socket counterclockwise to pull out the rear marker lamp bulb. To install, push the rear marker bulb into its socket and twist the bulb clockwise until it is positions inside the rear marker lamp lens. Install the left side of the rear marker lamp lens into the rear edge of the bumper, then press in the right edge at the front. Also, before closing up, reattach the negative battery cable.