How to Remove and Install a Center Console Base Assembly on 2005 Chrysler Pacifica?

Before removing the base of the floor console, first unmount the front and back console parts and the shift mechanism. Then, unscrew and washers from the weld studs. Separate all wire connectors you encounter and then tilt the floor console assembly so the harness can go outside through the console base assembly and then take it out of the vehicle. To install, place the console base assembly and run the wires through the base from the top down. After connecting the wire connectors, secure the L-brackets to the instrument panel by adding the two screws. Install the remaining nine attaching nuts and washers onto the weld studs, set the shift mechanism in place and after that, reattach the front and rear floor consoles.

OEM 2005 Chrysler Pacifica Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Center Console Bases found

View related parts
2005 Chrysler Pacifica Console Base, Center Lower Part Number: 5102443AB
Product Specifications
- Other Name: Base - Floor Console; Center Console, Center Lower; Center Console Base; Base Floor Console
- Position: Center Lower
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102443AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Rear Console, Taupe, Center Part Number: 1AF291L2AA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Rear; Console Floor Rear; Console Base
- Position: Rear Center
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF291L2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chrysler Pacifica Rear Console, Gray, Center Part Number: 1AF291DVAA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Rear; Console Floor Rear; Console Base
- Position: Rear Center
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF291DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2005 Chrysler Pacifica Center Console Base Parts and Q&A

Q: How to Remove and Install a Center Console Base Assembly on 2005 Chrysler Pacifica?
A: Before removing the base of the floor console, first unmount the front and back console parts and the shift mechanism. Then, unscrew and washers from the weld studs. Separate all wire connectors you encounter and then tilt the floor console assembly so the harness can go outside through the console base assembly and then take it out of the vehicle. To install, place the console base assembly and run the wires through the base from the top down. After connecting the wire connectors, secure the L-brackets to the instrument panel by adding the two screws. Install the remaining nine attaching nuts and washers onto the weld studs, set the shift mechanism in place and after that, reattach the front and rear floor consoles.