How to Remove and Install the Center Console Base for the Rear Floor Console on 2006 Chrysler Pacifica?

To get the rear floor console out, slip in the trim tool C-4755 or its similar tool to pop the locking tabs and then remove the scuff plate on the console. After that, undo the four screws holding down the scuff plate on both sides. Pull open the cup holder and remove the bottom screws that are holding it. After that, undo and pull out the three sidewall attaching screws and remove the rear floor console from inside the car. After sliding the rear floor console in place, install the sidewalls by screwing in three screws per side. After that, install two screws in the bottom of the cup holder and then install the other four under the scuff plate. Secure the floor console scuff plate by pressing on it and releasing the locking clips.

OEM 2006 Chrysler Pacifica Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Center Console Bases found

View related parts
2006 Chrysler Pacifica Console Base, Center Lower Part Number: 5102443AB
Product Specifications
- Other Name: Base - Floor Console; Center Console, Center Lower; Center Console Base; Base Floor Console
- Position: Center Lower
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102443AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Rear Console, Taupe, Center Part Number: 1AF291L2AA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Rear; Console Floor Rear; Console Base
- Position: Rear Center
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF291L2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Pacifica Rear Console, Gray, Center Part Number: 1AF291DVAA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Rear; Console Floor Rear; Console Base
- Position: Rear Center
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF291DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Center Console Base Parts and Q&A

Q: How to Remove and Install the Center Console Base for the Rear Floor Console on 2006 Chrysler Pacifica?
A: To get the rear floor console out, slip in the trim tool C-4755 or its similar tool to pop the locking tabs and then remove the scuff plate on the console. After that, undo the four screws holding down the scuff plate on both sides. Pull open the cup holder and remove the bottom screws that are holding it. After that, undo and pull out the three sidewall attaching screws and remove the rear floor console from inside the car. After sliding the rear floor console in place, install the sidewalls by screwing in three screws per side. After that, install two screws in the bottom of the cup holder and then install the other four under the scuff plate. Secure the floor console scuff plate by pressing on it and releasing the locking clips.