How to Service the Oil Pressure Switch on 2005 Chrysler Sebring?

In order to service the oil pressure sensor, lift the vehicle and put an oil container under the switch. Unplug the electric connector, take out the switch and replace the switch with the new one and reattach the connector. Reduce the vehicle, turn on the engine and wait 2 minutes then check and adjust the level of oil.

OEM 2005 Chrysler Sebring Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Pressure Switches found

View related parts
2005 Chrysler Sebring Oil Pressure Switch Part Number: 1258A003
$43.38 MSRP: $55.80
You Save: $12.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Oil Pressure Sending Unit
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 1.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1258A003
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Chrysler Sebring Oil Pressure Switch Part Number: 1258A002
Product Specifications
- Other Name: Switch - Engine Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Timing Gear Set
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.1 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1258A002
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2005 Chrysler Sebring Oil Pressure Switch Parts and Q&A

Q: How to Service the Oil Pressure Switch on 2005 Chrysler Sebring?
A: In order to service the oil pressure sensor, lift the vehicle and put an oil container under the switch. Unplug the electric connector, take out the switch and replace the switch with the new one and reattach the connector. Reduce the vehicle, turn on the engine and wait 2 minutes then check and adjust the level of oil.