How to Service an Oil Pressure Switch on 2006 Chrysler Sebring?

To care for the oil pressure sender, first lift the vehicle and place an oil container underneath where the pressure switch is. Remove the connector from the oil pressure switch electrical terminal and pull out the switch. On installation, fix the oil pressure switch and link the connector for the switch. Be sure the vehicle's lowered, switch on the engine and run it for at least 2 minutes. Turn off the engine after that and inspect the oil level, adding more oil if necessary.

OEM 2006 Chrysler Sebring Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2006 Chrysler Sebring Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2006 Chrysler Sebring Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2006 Chrysler Sebring?
A: To care for the oil pressure sender, first lift the vehicle and place an oil container underneath where the pressure switch is. Remove the connector from the oil pressure switch electrical terminal and pull out the switch. On installation, fix the oil pressure switch and link the connector for the switch. Be sure the vehicle's lowered, switch on the engine and run it for at least 2 minutes. Turn off the engine after that and inspect the oil level, adding more oil if necessary.