JeepParts
My Garage
My Account
Cart
OEM 2005 Dodge Caravan Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Axle Shafts found
2005 Dodge Caravan Axle Assembly, Front Driver Side Part Number: 4641855AE
$398.85 MSRP: $601.00You Save: $202.15 (34%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; CV Axle Assembly; Axle Shaft
- Position: Front Driver Side
- Replaces: 4641855AA, 4641855AC, 4641855AD, RX641855AE
- Item Weight: 17.00 Pounds
- Item Dimensions: 29.1 x 5.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4641855AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Caravan Axle Assembly, Rear Part Number: 4743630AB
Product Specifications- Other Name: Axle - Rear; Suspension Subframe, Rear; Axle Shaft; Axle Beam; Axle Rear
- Position: Rear
- Replaces: 5006112AB
- Item Weight: 85.60 Pounds
- Item Dimensions: 70.4 x 13.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743630AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
- Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Item Weight: 22.10 Pounds
- Item Dimensions: 43.7 x 5.7 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4641856AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Caravan Axle Assembly, Rear Part Number: 4684401AC
Product Specifications- Other Name: Axle - Rear; Axle Rear
- Position: Rear
- Item Weight: 72.80 Pounds
- Item Dimensions: 74.9 x 12.6 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4684401AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
- Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Front Drive For Additional Shafts See Group 2; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Item Weight: 23.00 Pounds
- Item Dimensions: 44.0 x 5.5 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4641894AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Caravan Axle Shaft Parts and Q&A
- Q: How to Remove and Install a Rear Axle Shaft on 2005 Dodge Caravan?A: Raise the car on a hoist until the rear wheels are up in the air, remove the wheel and carefully take out the axle shaft. After that, remove the cotter pin, the nut lock, the wave washer, the hub nut and washer. Since the half shaft outer CV joint functions as a bolt for the hub/bearing assembly, it's important to add and torque a bolt if the vehicle will be placed on its wheels, to avoid the hub assembly from coming loose. Following that, take out the bolts holding down the inner half shaft. You need to use the spring tension in the half shaft, first slightly compress its inner joint, pull down on it to clear the rear differential output, then pull the whole half shaft assembly out of the vehicle to remove it. Install the outer CV joint stub shaft into the hub bearing first for installation. Adjust the inner half shaft joint slightly inwards and lift the inner CV joint until the rear differential output flange is engaged. Attach the inner half shaft retaining bolts and turn them until a torque of 61 Nm (45 ft. lbs.) is reached. Then, align and secure the half shaft washer and hub nut, but remember to no torque them until the car is lifted. Following that, fit the wave washer, nut lock and a new cotter pin, although ensure that the cotter pin prongs go tightly around the nut lock on the hub. At the end, put on the rear wheel and tighten each lug nut to 135 Nm (100 ft. lbs.).
