How to Service the Sway Bar Link on 2005 Dodge Ram 1500?

Before servicing the sway bar link on a 4X2 car, make sure it is stable by raising and supporting it. Start by getting rid of the lower nut, then the upper nut, retainer and finally the grommets. After removing the body and wheels, disconnect the sway bar link (1) from the vehicle. A new sway bar link (1) needs to be positioned on the vehicle, while securing it using the lower nut, at a torque of 102 Nm (75 ft. lbs.). After that, insert the retainers and grommets, then fit the upper nut, tightening it to a torque of 27 Nm (20 ft. lbs.). To finish, drop the vehicle from the support and lower it to the floor again.

OEM 2005 Dodge Ram 1500 Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

View related parts
2005 Dodge Ram 1500 Stabilizer Link, Front Part Number: 5072934AG
$70.58 MSRP: $108.00
You Save: $37.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Stabilizer Bar Link Kit, Front; Suspension Stabilizer Bar Link, Front; Link
- Position: Front
- Replaces: 5072934AE, 5072934AD, 5086972AB
- Item Weight: 2.10 Pounds
- Item Dimensions: 17.5 x 5.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5072934AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10

2005 Dodge Ram 1500 Sway Bar Link Parts and Q&A

Q: How to Service the Sway Bar Link on 2005 Dodge Ram 1500?
A: Before servicing the sway bar link on a 4X2 car, make sure it is stable by raising and supporting it. Start by getting rid of the lower nut, then the upper nut, retainer and finally the grommets. After removing the body and wheels, disconnect the sway bar link (1) from the vehicle. A new sway bar link (1) needs to be positioned on the vehicle, while securing it using the lower nut, at a torque of 102 Nm (75 ft. lbs.). After that, insert the retainers and grommets, then fit the upper nut, tightening it to a torque of 27 Nm (20 ft. lbs.). To finish, drop the vehicle from the support and lower it to the floor again.