How to Service and Repair a Tie Rod End on 2005 Dodge Ram 1500?

Before servicing the tie rod end, unscrew the tie rod nuts and take the tie rod off its position between the drag link and left knuckle using Puller C-4150A. For installation, tie the tie rod to the left steering knuckle and drag link and tighten the nuts to 54 Nm (40 ft. lbs.) with a final 90 degrees of one more turn. After taking away the floor supports, guide the car all the way down, place the steering wheel in the center and adjust the toe before driving off. After finishing the adjustment, fasten the adjustment sleeve clamp bolts to 61 Nm (45 ft. lbs.) and place the retaining bolt sideways at the bottom.

OEM 2005 Dodge Ram 1500 Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
2005 Dodge Ram 1500 Outer Tie Rod Part Number: 5073582AD
Product Specifications
- Other Name: Tie Rod - Outer End; Steering Tie Rod End, Outer, Right; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod Kit Outer End; Tie Rod End
- Position: Outer
- Replaces: 5073582AC, 5073582AA, 5073582AE, 5073582AB
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.0 x 4.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073582AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10

2005 Dodge Ram 1500 Tie Rod End Parts and Q&A

Q: How to Service and Repair a Tie Rod End on 2005 Dodge Ram 1500?
A: Before servicing the tie rod end, unscrew the tie rod nuts and take the tie rod off its position between the drag link and left knuckle using Puller C-4150A. For installation, tie the tie rod to the left steering knuckle and drag link and tighten the nuts to 54 Nm (40 ft. lbs.) with a final 90 degrees of one more turn. After taking away the floor supports, guide the car all the way down, place the steering wheel in the center and adjust the toe before driving off. After finishing the adjustment, fasten the adjustment sleeve clamp bolts to 61 Nm (45 ft. lbs.) and place the retaining bolt sideways at the bottom.