OEM 2005 Dodge Ram 3500 Seat Heater

Seat Warmer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

  • 2005 Dodge Ram 3500 Seat Heater Diagram - 5101763AA
    View related parts
    Product Specifications
    • Other Name: Pad - Heater; Seat Heater; Pad; Pad Heater Seat Back
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 17.2 x 12.6 x 0.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5101763AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Ram 3500 Submodels:
    • Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
  • 2005 Dodge Ram 3500 Seat Heater Diagram - 5101764AB
    View related parts
    Product Specifications
    • Other Name: Pad - Heater; Seat Heater; Pad; Pad Heater Cushion
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 20.4 x 11.3 x 0.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5101764AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Ram 3500 Submodels:
    • Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS

2005 Dodge Ram 3500 Seat Heater Parts and Q&A

  • Q: How to Maintain Your Seat Heater on 2005 Dodge Ram 3500?
    A: Before servicing the seat heater, remove the negative battery cable and isolate it. Separate the correct seat cushion or seat back trim cover from its frame and then disconnect the electrical cables from the defective heated seat decor. Look for the cables attached to the inoperative heating element and divide them as close to the surface of the old heating part as possible. During installation, peel the adhesive off the replacement heating element (2), then attach it over the old element (1) so no part of the apparatus is folded. Join the electrical ends of the new heating element and afterward reconnect the battery's negative cable. Check that the heated seat works and install the corresponding seat cushion or seat back trim cover with the seat wire harness properly placed in both places.

Related 2005 Dodge Ram 3500 Parts