How to Remove and Replace Control Arm Bushing on 2005 Dodge Stratus?

Before you can access and change the isolator bushings, your lower control arm should be removed from the car. Let's start by removing the lower control arm assembly. Using Special Tool C-4212-F, put Bushing Receiver, Special Tool MB-990799 on the lower control arm, making sure it's square as you do so. After that, insert Bushing Remover, Special Tool 6602-5, into the isolator bushing on the Muffler Combo Assembly. After that, tighten the screw on Remover/Installer Special Tool C-4212-F to push the front bushing out from the lower control arm. Remove the lower control arm assembly and place Bushing Remove, Special Tool 6756 and Bushing Receiver, Special Tool C-4366-2 on the Special Tool C-4212-F, making sure Special Tool C-4366-2 is square. Screw in the Remover/Installer Special Tool C-4212-F to push the rear bushing away from the lower control arm. Take the steps again by separating the lower control arm, placing Bushing Remover, Special Tool 6877 and Bushing Receiver, Special Tool 6876 into the Special Tool C-4212-F and making sure Special Tool 6876 is square with the lower control arm and that Special Tool 6877 fits on the clevis bushing. After that, loosen the screw on Remover/Installer Special Tool C-4212-F and press the clevis bushing out of the lower control arm.

OEM 2005 Dodge Stratus Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Control Arm Bushings found

View related parts
2005 Dodge Stratus Lower Control Arm Bushing, Front Outer Part Number: 4695116
$15.67 MSRP: $19.87
You Save: $4.20 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Front Lower Outer, Strut Fork, Axle Pivot Bushing.; Lower Control Arm Front Bushing; Right Shock Absorber to LCA Bushing; Control Arm Bushing.
- Position: Front Lower Outer
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4695116
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Lower Control Arm Bushing, Front Inner Part Number: 4616736
$18.88 MSRP: $23.94
You Save: $5.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Suspension Control Arm Bushing, Front Lower Inner Rearward; Trailing Arm Bushing; Lower Control Arm Bushings; Seal for Front Suspension Control Arm Ball Joint.
- Position: Front Lower Inner
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.5 x 2.4 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4616736
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Lower Control Arm Bushing, Front Inner Part Number: 4764453AA
$23.03 MSRP: $29.19
You Save: $6.16 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Suspension Control Arm Bushing, Front Lower Inner Forward; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushing Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Front Lower Inner
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764453AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Bushing, Front Passenger Side Part Number: MR554382
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Front Right, Front Right Lower; Axle Pivot Bushing; Bushing Control Arm
- Position: Front Passenger Side
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR554382
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Bushing, Front Lower Driver Side Part Number: MR554381
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Front Left, Front Left Lower; Axle Pivot Bushing; Bushing Control Arm
- Position: Front Lower Driver Side
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR554381
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Upper Control Arm Bushing, Front Part Number: 4879189AA
Product Specifications
- Other Name: Bushing; Suspension Control Arm Bushing, Front Upper Forward; Axle Pivot Bushing; Axle Beam Mount; Control Arm Bushing
- Position: Front Upper
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4879189AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Lower Control Arm Bushing, Rear Upper Part Number: 4764961AA
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Upper; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Bushing; Bushing Control Arm; Control Arm Bushing
- Position: Rear Upper
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.0 x 2.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764961AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Upper Control Arm Bushing, Front Part Number: 4695096
Product Specifications
- Other Name: Bushing; Suspension Control Arm Bushing, Front Upper Rearward; Control Arm Bush Kit; Axle Pivot Bushing.; Lower Control Arm Lower Bushing; Front Suspension Control Arm Ball Joint Seal; Control Arm Bushing
- Position: Front Upper
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4695096
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Stratus Submodels:
- Base, ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2005 Dodge Stratus Control Arm Bushing Parts and Q&A

Q: How to Remove and Replace Control Arm Bushing on 2005 Dodge Stratus?
A: Before you can access and change the isolator bushings, your lower control arm should be removed from the car. Let's start by removing the lower control arm assembly. Using Special Tool C-4212-F, put Bushing Receiver, Special Tool MB-990799 on the lower control arm, making sure it's square as you do so. After that, insert Bushing Remover, Special Tool 6602-5, into the isolator bushing on the Muffler Combo Assembly. After that, tighten the screw on Remover/Installer Special Tool C-4212-F to push the front bushing out from the lower control arm. Remove the lower control arm assembly and place Bushing Remove, Special Tool 6756 and Bushing Receiver, Special Tool C-4366-2 on the Special Tool C-4212-F, making sure Special Tool C-4366-2 is square. Screw in the Remover/Installer Special Tool C-4212-F to push the rear bushing away from the lower control arm. Take the steps again by separating the lower control arm, placing Bushing Remover, Special Tool 6877 and Bushing Receiver, Special Tool 6876 into the Special Tool C-4212-F and making sure Special Tool 6876 is square with the lower control arm and that Special Tool 6877 fits on the clevis bushing. After that, loosen the screw on Remover/Installer Special Tool C-4212-F and press the clevis bushing out of the lower control arm.