How to Service and Repair a Drive Belt for a 2.0L/2.4L Engine on 2005 Dodge Stratus?

When working on the 2.0L/2.4L engine drive belt, first lift the vehicle on a hoist and take out the right front wheel with its splash shield. With a 3/8" drive breaker bar in the square hole of the belt pivot bracket, twist the tensioner clockwise as far as possible so that the belt can be removed from the pulleys. Once you have removed the belt, relax the tensioner. Raise the car, remove the right front wheel and its belt splash shield, then let go of the air conditioning compressor/generator belt and loosen both bolts at the top of the power steering pump. After reducing the tension on the belt, move the pump assembly toward the engine to access it. Always skip the air conditioning compressor pulley and route the belt properly over the rest, then turn the breaker bar clockwise to stretch the belt for installation onto the compressor pulley. Let the belt belt out, remove the breaker bar and attach the splash shield along with the right front wheel again before lifting the car. For step-by-step directions, first put the belt on the pulleys, then stick the 1/2 inch drive breaker bar into the hole on the bracket and turn clockwise, while tightening the adjuster and pivot bolts. Also, fit the air conditioning compressor/generator belt, the belt splash shield and the right front wheel before you lower the car or drain the oil again.

OEM 2005 Dodge Stratus Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Belts found

View related parts
2005 Dodge Stratus Serpentine Belt Part Number: 4861733AC
$41.84 MSRP: $61.40
You Save: $19.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt Alternator And A/C Compressor; Belt Alternator Drive
- Replaces: 4861722AB, 4861733AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 17.8 x 9.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861733AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Serpentine Belt Part Number: MN187016
$57.60 MSRP: $91.25
You Save: $33.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator & Others; Accessory Drive Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt
- Replaces: MN158101
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 4.9 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN187016
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T, SE | 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Serpentine Belt Part Number: MD376691
$33.98 MSRP: $48.75
You Save: $14.77 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator; Accessory Drive Belt; Alternator Belt; Belt Alternator
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD376691
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Stratus Submodels:
- SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Power Steering Belt Part Number: MN195135
$4.08 MSRP: $5.17
You Save: $1.09 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt Power Steering; Drive Belt
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN195135
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Stratus Submodels:
- SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Serpentine Belt Part Number: 4892444AA
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Power Steering Belt; Belt Power Steering; Drive Belt
- Replaces: 4892749AB, 4892749AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 19.4 x 9.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892444AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Drive Belt Part Number: 4892830AA
Product Specifications
- Other Name: Alternator And A/C Compress; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt Alternator And A/C Compressor
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.0 x 3.6 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892830AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Serpentine Belt Part Number: 4892562AA
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Alternator And A/C Compressor
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.5 x 3.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892562AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Serpentine Belt Part Number: MN187017
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Power Steering Belt; Belt Power Steering; Drive Belt
- Item Weight: 1.30 Pounds
- Item Dimensions: 16.3 x 4.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN187017
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T, SE | 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Alternator Belt Part Number: 1340A004
Product Specifications
- Other Name: Belt - Alternator & Others; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1340A004
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Stratus Submodels:
- SXT | 4 Cyl 2.4 L GAS

2005 Dodge Stratus Drive Belt Parts and Q&A

Q: How to Service and Repair a Drive Belt for a 2.0L/2.4L Engine on 2005 Dodge Stratus?
A: When working on the 2.0L/2.4L engine drive belt, first lift the vehicle on a hoist and take out the right front wheel with its splash shield. With a 3/8" drive breaker bar in the square hole of the belt pivot bracket, twist the tensioner clockwise as far as possible so that the belt can be removed from the pulleys. Once you have removed the belt, relax the tensioner. Raise the car, remove the right front wheel and its belt splash shield, then let go of the air conditioning compressor/generator belt and loosen both bolts at the top of the power steering pump. After reducing the tension on the belt, move the pump assembly toward the engine to access it. Always skip the air conditioning compressor pulley and route the belt properly over the rest, then turn the breaker bar clockwise to stretch the belt for installation onto the compressor pulley. Let the belt belt out, remove the breaker bar and attach the splash shield along with the right front wheel again before lifting the car. For step-by-step directions, first put the belt on the pulleys, then stick the 1/2 inch drive breaker bar into the hole on the bracket and turn clockwise, while tightening the adjuster and pivot bolts. Also, fit the air conditioning compressor/generator belt, the belt splash shield and the right front wheel before you lower the car or drain the oil again.