Other Name: Panel - Door Belt Moulding; Door Window Belt Weatherstrip, Front Right Inner; Door Moldings; Weatherstrip, Door Belt Moulding; Weatherstrip
Position: Front Inner Passenger Side
Item Weight: 0.60 Pounds
Item Dimensions: 26.0 x 2.0 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55235878AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
2005 Jeep Liberty Weather Strip Parts and Q&A
Q: How to Maintain a Swing Gate Opening Weather Strip on 2005 Jeep Liberty?
A: Open the swing gate and use a tool C-4755 or an equivalent to take out the swing gate lower sill plate. Following this, remove the plastic sealment cover from the gate. Install the seal by setting it just under (bottom) the gate opening, about 10 to 13 cm (4 to 5 in.) over from the hinge. Have the trim lip point into the open area. Lay the seal over the sill flange and press along the edge of the door opening so that it sits on the jambs. Smooth the seal as you go so that no puckers or wrinkles appear. Pull the trim cord to make certain the edge is covered by the trim lip everywhere. After that, place the lower sill plate and ensure the attachment clips are seated.