How Can a Battery Sensor Be Serviced and Reinstalled on 2005 Jeep Wrangler?

This can be serviced after removing the battery, the battery temperature sensor is located under the vehicle battery but is mounted to a mounting hole from the battery tray. Then, disconnect the sensor pigtail harness from engine wire harness and pry the sensor straight out of battery tray mounting hole. To install, run the pigtail harness through the hole on top of the battery tray and stick the sensor in place. Lastly, connect the pigtail harness back and install the battery.

OEM 2005 Jeep Wrangler Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2005 Jeep Wrangler Temperature Sensor Part Number: 56027332
$61.30 MSRP: $90.45
You Save: $29.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Battery Temperature; Battery Temperature Sensor; Battery Current Sensor; Sensor; Sensor, Battery Temperature; Sensor Battery Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.5 x 3.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027332
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2005 Jeep Wrangler Battery Sensor Parts and Q&A

Q: How Can a Battery Sensor Be Serviced and Reinstalled on 2005 Jeep Wrangler?
A: This can be serviced after removing the battery, the battery temperature sensor is located under the vehicle battery but is mounted to a mounting hole from the battery tray. Then, disconnect the sensor pigtail harness from engine wire harness and pry the sensor straight out of battery tray mounting hole. To install, run the pigtail harness through the hole on top of the battery tray and stick the sensor in place. Lastly, connect the pigtail harness back and install the battery.