How to Replace an Oil Filter on 2005 Jeep Wrangler?

To replace the oil filter, lift your vehicle on a hoist and place the oil container below where the filter is located. Before servicing, secure the remove/install tool band strap against the base lock seam where the filter can connects, because the can is reinforced in that area. Apply a suitable wrench to the filter, then turn it in the counterclockwise direction to loosen and remove it. Make sure the surface where the filter mounts is clear of dirt, gasket remains and is perfectly level before placing the filter. Use clean engine oil to grease the new oil filter gasket, put the oil filter in position, tighten it until you feel the gasket making contact with the base and stop at 21 Nm (15 ft. lbs.).

OEM 2005 Jeep Wrangler Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2005 Jeep Wrangler Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2005 Jeep Wrangler Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4105409AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, SE, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS

2005 Jeep Wrangler Oil Filter Parts and Q&A

Q: How to Replace an Oil Filter on 2005 Jeep Wrangler?
A: To replace the oil filter, lift your vehicle on a hoist and place the oil container below where the filter is located. Before servicing, secure the remove/install tool band strap against the base lock seam where the filter can connects, because the can is reinforced in that area. Apply a suitable wrench to the filter, then turn it in the counterclockwise direction to loosen and remove it. Make sure the surface where the filter mounts is clear of dirt, gasket remains and is perfectly level before placing the filter. Use clean engine oil to grease the new oil filter gasket, put the oil filter in position, tighten it until you feel the gasket making contact with the base and stop at 21 Nm (15 ft. lbs.).