How to Maintain a Front Door Handle on 2006 Chrysler 300?

You should start by taking out the trim panel, speaker and watershield from the inside of the front door. After that, take out the screw that holds the bottom of the pull cup bracket and the window regulator rear rail to the door. Release the screw at the top of the pull cup bracket and then take the upper pull cup bracket screw out of the keyed hole and remove the bracket. Access the latch release link attached to the exterior door handle by pressing the plastic clip behind the door inside the shell and pulling that link free. Make sure the handle on the driver's side is unlocked by first unfitting the plastic clip holding the lock actuator to the lock cylinder. Remove the three inner screws holding the handle in place and take the handle out from the outside of the door. During installation, put the exterior handle into mounting holes and tighten three screws from the inside; these should be tightened to 5 N.m (44 in.lbs.). Connect the lock actuator link from the driver side to the lock cylinder and hold it with the plastic clip. Latch release the lock by moving the link to the exterior handle and fastening it with the plastic pin. Push the upper screw into the pull cup bracket by hand, insert it into the keyed hole and secure the bottom of the bracket along with the window regulator rear rail with a screw tightened to 11 N.m (100 in.lbs.). At the end, set the screw in the top of the pull cup bracket to 10 N.m (90 in.lbs.), then line up the watershield, speaker and trim panel again inside the door.

OEM 2006 Chrysler 300 Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Handles found

View related parts
2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: 5065801AH
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Exterior Door; Front Left Outer, Rear Left Outer; Outside Door Handle
- Position: Rear Outer Driver Side
- Replaces: 5065801AE, 5065801AC, 5065801AG, 5065801AF
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.4 x 8.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065801AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: 4589009AH
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Exterior Door; Front Left Outer, Rear Left Outer; Outside Door Handle
- Position: Rear Outer Driver Side
- Replaces: 4589009AE, 4589009AG, 4589009AC, 4589009AF, 4589009AD
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.1 x 8.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589009AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Handle, Outside, Rear Outer Passenger Side Part Number: 5065800AH
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Exterior Door; Front Right Outer, Rear Right Outer; Outside Door Handle
- Position: Rear Outer Passenger Side
- Replaces: 5065800AF, 5065800AC, 5065800AD, 5065800AE, 5065800AG
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.3 x 8.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065800AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: WC83TZZAH
Product Specifications
- Other Name: Handle - Exterior Door; Exterior Door Handle, Rear Left Outer; Exterior Door Handle
- Position: Rear Outer Driver Side
- Replaces: WC83FDTAH, WC83TZZAD, WC83XWGAG, WC83CDMAG, WC83ZMQAG, WC83TZZAC, WC83AP4AG, WC83GW7AH, WC83XWGAH, WC83HWLAH, WC83TZZAB, WC83BPKAG, WC83SW1AH, WC83GUVAH, WC83AXRAG, WC83DX8AH, WC83WS2AG, WC83ARHAG, WC83TZZAE, WC83TZZAF, WC83BB8AG, WC83ZR3AH, WC83TZZAG
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.1 x 8.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WC83TZZAH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Handle, Outside, Front Outer Driver Side Part Number: WC81TZZAH
Product Specifications
- Other Name: Handle - Exterior Door; Front Left Outer, Rear Left Outer; Outside Door Handle
- Position: Front Outer Driver Side
- Replaces: WC81TZZAE, WC81TZZAC, WC81TAAAG, WC81DA4AG, WC81SW1AG, WC81CDMAF, WC81GW7AG, WC81TZZAB, WC81WELAF, WC81BB8AF, WC81TZZAD, WC81TZZAG, WC81DYFAG, WC81ZMQAF, WC81AP4AF, WC81AXRAF, WC81BPKAF, WC81XWGAF, WC81TZZAF
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 8.2 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WC81TZZAH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Handle, Outside, Rear Outer Passenger Side Part Number: WC82TZZAH
Product Specifications
- Other Name: Handle - Exterior Door; Front Right Outer, Rear Right Outer; Outside Door Handle
- Position: Rear Outer Passenger Side
- Replaces: WC82WS2AH, WC82SW1AH, WC82GBSAH, WC82ZMQAG, WC82CDMAH, WC82TZZAD, WC82AXRAH, WC82DA4AG, WC82XWGAG, WC82DX8AH, WC82GW7AH, WC82AP4AG, WC82AXRAG, WC82ARHAG, WC82ZR3AH, WC82TZZAF, WC82DYFAG, WC82BB8AG, WC82GUVAH, WC82TZZAE, WC82TZZAG, WC82CDMAG, WC82ARHAH, WC82HWLAH, WC82TZZAC, WC82WS2AG, WC82BPKAG, WC82FDTAH, WC82XWGAH
- Item Weight: 1.20 Pounds
- Item Dimensions: 12.9 x 5.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WC82TZZAH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Chrysler 300 Door Handle Parts and Q&A

Q: How to Maintain a Front Door Handle on 2006 Chrysler 300?
A: You should start by taking out the trim panel, speaker and watershield from the inside of the front door. After that, take out the screw that holds the bottom of the pull cup bracket and the window regulator rear rail to the door. Release the screw at the top of the pull cup bracket and then take the upper pull cup bracket screw out of the keyed hole and remove the bracket. Access the latch release link attached to the exterior door handle by pressing the plastic clip behind the door inside the shell and pulling that link free. Make sure the handle on the driver's side is unlocked by first unfitting the plastic clip holding the lock actuator to the lock cylinder. Remove the three inner screws holding the handle in place and take the handle out from the outside of the door. During installation, put the exterior handle into mounting holes and tighten three screws from the inside; these should be tightened to 5 N.m (44 in.lbs.). Connect the lock actuator link from the driver side to the lock cylinder and hold it with the plastic clip. Latch release the lock by moving the link to the exterior handle and fastening it with the plastic pin. Push the upper screw into the pull cup bracket by hand, insert it into the keyed hole and secure the bottom of the bracket along with the window regulator rear rail with a screw tightened to 11 N.m (100 in.lbs.). At the end, set the screw in the top of the pull cup bracket to 10 N.m (90 in.lbs.), then line up the watershield, speaker and trim panel again inside the door.

Related 2006 Chrysler 300 Parts

Alternate Year Models

2005 Chrysler 300 Door Handle 2007 Chrysler 300 Door Handle

OEM 2006 Chrysler 300 Door Handle

6 Door Handles found

2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: 5065801AH

2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: 4589009AH

2006 Chrysler 300 Handle, Outside, Rear Outer Passenger Side Part Number: 5065800AH

2006 Chrysler 300 Handle, Outside, Rear Outer Driver Side Part Number: WC83TZZAH

2006 Chrysler 300 Handle, Outside, Front Outer Driver Side Part Number: WC81TZZAH

2006 Chrysler 300 Handle, Outside, Rear Outer Passenger Side Part Number: WC82TZZAH

2006 Chrysler 300 Door Handle Parts and Q&A

Related 2006 Chrysler 300 Parts

Alternate Year Models