How to Service and Repair a Tail Light Unit on 2006 Chrysler Crossfire?

The tail lamp unit should be serviced by first disconnecting the negative battery cable. Take off the cargo access panel and afterward, disconnect the harness connector and get rid of the nuts on the tail lamp unit. Installation involves inserting the tail lamp into the body panel and tightening the nuts to 2 Nm (±0.3 Nm) (18 in. lbs.). After that, connect the harness connector and put the access panel in the rear cargo area interior before reconnecting the negative battery cable.

OEM 2006 Chrysler Crossfire Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
2006 Chrysler Crossfire Tail Lamp Assembly, Rear Passenger Side Part Number: 5098677AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 15.7 x 12.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098677AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Tail Lamp Assembly, Rear Driver Side Part Number: 5098678AA
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Rear Driver Side
- Item Weight: 3.80 Pounds
- Item Dimensions: 15.5 x 12.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Tail Light Parts and Q&A

Q: How to Service and Repair a Tail Light Unit on 2006 Chrysler Crossfire?
A: The tail lamp unit should be serviced by first disconnecting the negative battery cable. Take off the cargo access panel and afterward, disconnect the harness connector and get rid of the nuts on the tail lamp unit. Installation involves inserting the tail lamp into the body panel and tightening the nuts to 2 Nm (±0.3 Nm) (18 in. lbs.). After that, connect the harness connector and put the access panel in the rear cargo area interior before reconnecting the negative battery cable.