How to Maintain a Coolant Reservoir on 2006 Chrysler Pacifica?

Disconnect the two hoses from the coolant recovery container before starting to service it. After that, remove the lower nuts holding the system and the top nut to take the recovery container off. To install the system, link the recovery hose to the container and sit the recovery unit up on the frame rail. Place the upper attaching screw and secure it until it reaches 7 Nm (60 inch lbs.). With the vehicle on a hoist, insert the lower attaching screws and tighten each to 8.5 Nm (75 inch lbs.). After that, place the vehicle on the ground and top off the coolant when needed.

OEM 2006 Chrysler Pacifica Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2006 Chrysler Pacifica Reservoir Tank Part Number: 4880498AC
Product Specifications
- Other Name: Bottle - Coolant Recovery; Engine Coolant Reservoir; Coolant Reservoir; Reservoir
- Replaces: 4880498AB
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.8 x 8.6 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4880498AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Pacifica Coolant Reservoir Parts and Q&A

Q: How to Maintain a Coolant Reservoir on 2006 Chrysler Pacifica?
A: Disconnect the two hoses from the coolant recovery container before starting to service it. After that, remove the lower nuts holding the system and the top nut to take the recovery container off. To install the system, link the recovery hose to the container and sit the recovery unit up on the frame rail. Place the upper attaching screw and secure it until it reaches 7 Nm (60 inch lbs.). With the vehicle on a hoist, insert the lower attaching screws and tighten each to 8.5 Nm (75 inch lbs.). After that, place the vehicle on the ground and top off the coolant when needed.