How to Remove and Replace a Control Arm Bushing in the Rear Isolator of a Front Suspension Lower Control Arm Assembly on 2006 Chrysler Sebring?

To do this job, first separate the lower control arm from the rest of the vehicle. Rubber bumpers installed securely into the lower control arm's mounting hole by hand should be square with the opening and oriented so the empty part in the rubber is opposite the ball joint. After that, connect the Bushing Installer, Special Tool 6760, to the Remover/Installer Special Tool C-4212-F where its screw is located. Bring together all the special tools for installing the rear isolator bushing and secure them so Special Tool 6756 is square on the lower control arm and Special Tool 6760 is positioned correctly with the isolator bushing. Firmly tighten C-4212-F onto the bushing Remover/Installer, then insert it into the lower control arm until pressed all the way against the machined surface for the best location. Place the lower control arm back on the underside of the vehicle, according to the instructions.

OEM 2006 Chrysler Sebring Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arm Bushings found

View related parts
2006 Chrysler Sebring Lower Control Arm Bushing, Front Outer Part Number: 4695116
$15.67 MSRP: $19.87
You Save: $4.20 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Front Lower Outer, Strut Fork, Axle Pivot Bushing.; Lower Control Arm Front Bushing; Right Shock Absorber to LCA Bushing; Control Arm Bushing.
- Position: Front Lower Outer
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4695116
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Lower Control Arm Bushing, Front Inner Part Number: 4616736
$18.88 MSRP: $23.94
You Save: $5.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Suspension Control Arm Bushing, Front Lower Inner Rearward; Trailing Arm Bushing; Lower Control Arm Bushings; Seal for Front Suspension Control Arm Ball Joint.
- Position: Front Lower Inner
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.5 x 2.4 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4616736
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Lower Control Arm Bushing, Front Inner Part Number: 4764453AA
$23.03 MSRP: $29.19
You Save: $6.16 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Lower Control Arm; Suspension Control Arm Bushing, Front Lower Inner Forward; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushing Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Front Lower Inner
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764453AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Upper Control Arm Bushing, Front Part Number: 4879189AA
Product Specifications
- Other Name: Bushing; Suspension Control Arm Bushing, Front Upper Forward; Axle Pivot Bushing; Axle Beam Mount; Control Arm Bushing
- Position: Front Upper
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4879189AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Lower Control Arm Bushing, Rear Upper Part Number: 4764961AA
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Upper; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Bushing; Bushing Control Arm; Control Arm Bushing
- Position: Rear Upper
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.0 x 2.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4764961AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Control Arm Bushing Parts and Q&A

Q: How to Remove and Replace a Control Arm Bushing in the Rear Isolator of a Front Suspension Lower Control Arm Assembly on 2006 Chrysler Sebring?
A: To do this job, first separate the lower control arm from the rest of the vehicle. Rubber bumpers installed securely into the lower control arm's mounting hole by hand should be square with the opening and oriented so the empty part in the rubber is opposite the ball joint. After that, connect the Bushing Installer, Special Tool 6760, to the Remover/Installer Special Tool C-4212-F where its screw is located. Bring together all the special tools for installing the rear isolator bushing and secure them so Special Tool 6756 is square on the lower control arm and Special Tool 6760 is positioned correctly with the isolator bushing. Firmly tighten C-4212-F onto the bushing Remover/Installer, then insert it into the lower control arm until pressed all the way against the machined surface for the best location. Place the lower control arm back on the underside of the vehicle, according to the instructions.