Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chrysler Sebring EGR Tube

EGR Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Tubes found

  • 2006 Chrysler Sebring EGR Tube - 4591415AB
    2006 Chrysler Sebring EGR Tube Diagram - 4591415AB
    View related parts

    2006 Chrysler Sebring EGR Tube Part Number: 4591415AB

    Product Specifications
    • Other Name: Tube - Exhaust Manifold To EGR Valance; Exhaust Gas Recirculation (EGR) Tube
    • Replaces: 4591415AA
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 9.9 x 4.7 x 2.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4591415AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Sebring Submodels:
    • Base, GTC, LX, LXi, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
  • 2006 Chrysler Sebring EGR Tube - 4861683AB
    2006 Chrysler Sebring EGR Tube Diagram - 4861683AB
    View related parts

    2006 Chrysler Sebring EGR Tube Part Number: 4861683AB

    Product Specifications
    • Other Name: Tube - EGR Valve To Intake; Exhaust Gas Recirculation (EGR) Tube
    • Replaces: 4861683AA
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 14.7 x 8.7 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4861683AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Sebring Submodels:
    • Base, GTC, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring EGR Tube Parts and Q&A

  • Q: How to Service and Repair an EGR Tube on 2006 Chrysler Sebring?
    A: Before servicing or repairing the EGR tube, detach the black negative battery cable and take off the air cleaner box. After that, unbolt the clamp on the EGR tube at the intake manifold and move the clamp out of its spot in the intake. Next, release the two bolts from the EGR valve and afterward, remove the tube and gasket. Remove the rubber silicone seal from the intake manifold and check for damage. If it's damaged, replace it. Before installation, make sure the intake manifold's rubber seal is working well; if it isn't, replace it. Set an upgraded gasket between the EGR tube and EGR valve, loosely attach the bolts to the EGR valve and place the clamp into the intake manifold opening, tightening the bolt to 11.3 N.m (100 in. lbs.). Next, tighten the bolts on the EGR valve to 11.3 N.m (98 in lbs.), attach the air cleaner box and finally connect the negative battery cable once more.

Related 2006 Chrysler Sebring Parts

Alternate Year Models

+
2005 Chrysler Sebring EGR Tube 2007 Chrysler Sebring EGR Tube