How to Remove and Reinstall an Oxygen Sensor in the Exhaust Manifold on 2006 Chrysler Sebring?

One heated oxygen sensor is positioned in the exhaust manifold by the engine. Read the order of actions before starting. First turn off the battery and then disconnect the connector from the heated oxygen sensor. You can take out the oxygen sensor with either Snap-On YA8875 or a crow foot wrench socket. Immediately after taking off the manifold, clean the threads with an 18 mm X 1.5 + 6 E tap. With a sensor you plan to reuse, coat the threads with anti-seize compound, for example Loctite 771-64. Sensors bought new are already pre-coated. Adjust the sensor to a torque of 28 N.m (20 ft. lbs.), place the heated oxygen sensor connector and lastly reattach the negative battery wire.

OEM 2006 Chrysler Sebring Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2006 Chrysler Sebring Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2006 Chrysler Sebring Oxygen Sensor, Front Part Number: 4606133AD
$91.13 MSRP: $191.00
You Save: $99.87 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 28.5 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606133AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Oxygen Sensor Parts and Q&A

Q: How to Remove and Reinstall an Oxygen Sensor in the Exhaust Manifold on 2006 Chrysler Sebring?
A: One heated oxygen sensor is positioned in the exhaust manifold by the engine. Read the order of actions before starting. First turn off the battery and then disconnect the connector from the heated oxygen sensor. You can take out the oxygen sensor with either Snap-On YA8875 or a crow foot wrench socket. Immediately after taking off the manifold, clean the threads with an 18 mm X 1.5 + 6 E tap. With a sensor you plan to reuse, coat the threads with anti-seize compound, for example Loctite 771-64. Sensors bought new are already pre-coated. Adjust the sensor to a torque of 28 N.m (20 ft. lbs.), place the heated oxygen sensor connector and lastly reattach the negative battery wire.