Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chrysler Sebring Starter Motor

Starter Ignition
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter motors found

  • 2006 Chrysler Sebring Starter Motor - 4606875AE
    2006 Chrysler Sebring Starter Motor Diagram - 4606875AE
    View related parts

    2006 Chrysler Sebring Starter Part Number: 4606875AE

    $203.81 MSRP: $292.00
    You Save: $88.19 (31%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
    • Item Weight: 7.40 Pounds
    • Item Dimensions: 8.4 x 7.2 x 7.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4606875AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Sebring Submodels:
    • Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
  • 2006 Chrysler Sebring Starter Motor - 4609703AG
    2006 Chrysler Sebring Starter Motor Diagram - 4609703AG
    View related parts

    2006 Chrysler Sebring Starter Part Number: 4609703AG

    Product Specifications
    • Other Name: Starter - Engine; Starter Motor; Starter Engine
    • Replaces: 4609703AF
    • Item Weight: 9.20 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4609703AG
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Sebring Submodels:
    • Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Starter Motor Parts and Q&A

  • Q: How to Service a Starter Motor on a 4-Cylinder Engine on 2006 Chrysler Sebring?
    A: Start by opening the hood by releasing the hood latch before anything else on a 4-cylinder starter motor. Disconnect the negative of the battery and then remove the air cleaner box. Following that, get rid of the lower bolt, the upper bolt and then the ground wire. Get rid of the starter, remove the wire connector from the solenoid and take off the nut holding the B+ wire to the terminal. Take away both the solenoid and the B+ wires from the starter terminals you removed. To install, match the solenoid wire to the starter's terminal, connect the B+ wire to the terminal and use the nut to secure it and connect the solenoid wire connector to the terminal you just installed. Set up the starter, finish with the upper and lower tastes and at last reconnect the battery and install the air cleaner box.

Related 2006 Chrysler Sebring Parts

Alternate Year Models

+
2005 Chrysler Sebring Starter Motor 2007 Chrysler Sebring Starter Motor