How to Install a Starter Motor for a 2.0/2.4L Engine on 2007 Chrysler Sebring?

To install the starter motor for 2.0/2.4L engine, connect to the wiring and tighten the battery cable nut to 10Nm. Reinstall the starter motor loosely and then install the throttle body and bracket. Secure starter with bolts at 54nm, connect throttle body and lower car. Finally, connect the negative cable of the battery.

OEM 2007 Chrysler Sebring Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter motors found

View related parts
2007 Chrysler Sebring Starter Part Number: 5034555AA
$263.30 MSRP: $390.00
You Save: $126.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Item Weight: 6.50 Pounds
- Item Dimensions: 6.7 x 6.4 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5034555AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler Sebring Starter Part Number: 4608800AE
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Item Weight: 8.30 Pounds
- Item Dimensions: 6.8 x 6.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4608800AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Starter Motor Parts and Q&A

Q: How to Install a Starter Motor for a 2.0/2.4L Engine on 2007 Chrysler Sebring?
A: To install the starter motor for 2.0/2.4L engine, connect to the wiring and tighten the battery cable nut to 10Nm. Reinstall the starter motor loosely and then install the throttle body and bracket. Secure starter with bolts at 54nm, connect throttle body and lower car. Finally, connect the negative cable of the battery.